why does my microwave turntable not turn

Microwave turntable not turning: causes and solutions

Full Answer

Why is my microwave turntable not turning?

Try These Fixes

• Drive Motor. ...
• Coupler. ...
• Roller Guide. ...
• Clean the Microwave. ...
• Shut the Microwave Door. ...
• Can You Still Use the Microwave if the Turn Table Doesn’t Spin. ...
• Replace Microwave Turn Table. ...
• You Need to Know This About Your Microwave! ...
• Bottom Line. ...

Why is the turntable in microwave not working?

To do so, follow the given points:

• Open the microwave door and remove the glass tray and support ring.
• Use a screwdriver to remove the screws from the back side of the microwave.
• Disconnect the wire harness by squeezing the plug and then set the lower panel aside.
• Now Use a screwdriver to pop the terminals off the turntable motor wires.

More items...

How to fix a microwave turntable?

Steps: 8

• Unplug your microwave oven. ...
• Remove the glass tray from inside the microwave to turn it on its side. ...
• Remove the screws from the bottom cover, which hold the panel in place. ...
• Disconnect the wire harness from the motor. ...
• Remove the mounting screw or screws. ...
• Rotate the motor clockwise and pull it out. ...
• Insert the shaft of the new motor into the drive coupling. ...

More items...

Why is my Toshiba microwave turntable not turning?

Microwave Turntable Does Not Turn. If the turntable does not turn check the following: Make sure the turntable is centered and seated properly. On models with a stirrer motor there is a shaft protruding up through the floor of the microwave. Make sure the turntable is securely fastened to this shaft.

How do I fix my microwave turntable not turning?

Then it's time to retire old Zappy.Unplug the microwave. Safety first, kids.Remove the glass tray and the circular turntable guide. Wash them both in warm, soapy water to get rid of anything stuck. ... Clean the internal cavity. ... Check that the drive bushing is working. ... Put it back together. ... Test it out.

What happens if your microwave doesn't spin?

Dirty or Damaged Roller Guide Just as obstructions in the track can stop the rotation, so can broken wheels. If the wheels of your roller guide are broken or have become especially dirty, then your plate may have stopped spinning. A broken roller arm can also be a cause of unbalanced and rotation-stopping forces.

Can you use a microwave with a broken turntable?

' However, having a broken plate does not need to be a big problem. As Mark suggests, you can still use your microwave before rushing to replace it. It is just wise to replace it after some time – to avoid overcooked food.

What makes a microwave turn?

Right underneath the support should be the coupling. It's usually made of hard plastic and pokes up from the center floor of the microwave. It turns when the microwave's on, making the plate and support spin.

How do you test a microwave turntable motor?

0:312:09Microwave motor How to remove and test How to repair change Replace ...YouTubeStart of suggested clipEnd of suggested clipAnd I directly plug that into the wall. You know typically 120 yeah ac 120 volt. So I will hook thatMoreAnd I directly plug that into the wall. You know typically 120 yeah ac 120 volt. So I will hook that up turn the power on and then I'll test to make sure it cycles correctly and in both directions.

How do you replace a turntable motor in a microwave?

0:191:40GE Microwave Turntable Motor Replacement #WB26X10233YouTubeStart of suggested clipEnd of suggested clipAs with most repairs you should unplug the power cord. First to replace the turntable motor in yourMoreAs with most repairs you should unplug the power cord. First to replace the turntable motor in your microwave oven remove all of the screws securing. The bottom panel. And carefully lower the panel.

Is a turntable necessary in a microwave?

In order to distribute the waves evenly throughout the cavity, you must control the movement of the food, hence the rotating plate! The rotation of the plate ensures that microwaves spread evenly and that the food cooks simultaneously and uniformly.

Are microwave turntables standard size?

Answer: The Standard Microwave turntable is 16" in diameter.

Can you superglue a microwave plate?

When your microwave's glass tray breaks, it can be tempting to try and fix it yourself with some glue. However, this is not a recommended solution, as it can create a number of safety hazards. When you try to fix a broken microwave glass tray with glue, you run the risk of creating dangerous hot spots on the tray.

How do I know if my microwave turntable motor is bad?

Defective Turntable Motor This part is required to rotate the turntable, as it's the motor that powers it. To determine if this part is defective in your microwave, you can use a multimeter to test it for continuity. If the motor tests negative for continuity, you'll need to replace the part.

How do you turn on a microwave turntable?

If your microwave has a "Turntable" button on the display, use the below instructions: Locate the "Turntable" button/key on the control panel. Press the button to either turn on or off the function.

How long does a microwave last?

The average microwave oven lasts about seven years with normal use, and even less with heavy use and poor maintenance. A large family may find themselves replacing their appliance every four to five years as they become more reliant on its use to heat up snacks and leftovers, or to defrost meals.

What does the turntable do in a microwave?

Many microwave ovens have turntables inside to help cook the food more evenly. If your microwave does not have one, a turntable accessory can be purchased to help prevent hot spots. You can determine where the hot spots are in your microwave by conducting a marshmallow test.

Can you use a microwave if the front glass is broken but the inner door is fine?

It's not safe to use your microwave with broken door glass but you can repair the appliance back to good-as-new.

What can I use as a microwave plate?

Glass and ceramic dishware are usually safe for microwave use, but there are exceptions like crystal and some handmade pottery. When it comes to glass or ceramic plates, bowls, cups, mugs, mixing bowls or bakeware, you should be in the clear as long as it doesn't feature metallic paint or inlays.

Why did my plate break in the microwave?

Cookware Breaking: If a microwave safe dish breaks during normal use in a microwave the problem is most likely a "hairline crack" invisible to the eye, or a chip or visible crack. Liquid can seep into the damaged area and attract microwaves. The resulting heat and steam can create enough pressure to shatter the dish.

Why is my microwave not turning?

Another reason your microwave turntable is not turning may be because of the glass tray drive coupling. To inspect it, do the following…. Step 1: Take out the microwave glass tray and support. Step 2: Gently pull the coupling out and inspect it closely for any damage. If it’s broken or damaged in any way, get a new one.

How to replace a turntable motor in a microwave?

So, to check and replace the turntable motor in a microwave, do the following…. Step 1: First of all, turn off the microwave and unplug. This is always an important step to follow before starting a repair on any electrical appliance. Step 2: Open the microwave door and take out the tray and support.

What Happens If a Plate Is Not Microwave Safe?

Using paper or metal plates in a microwave is the most dangerous thing to do. The metal would spark which would result in a fire. The same goes for paper plates. So ensure that you do not use metal or paper plates in a microwave.

How to check if a door switch is good?

Make sure to note where each wire goes on the door switch. Step 5: Press the small button on the door switch to test if it’s still good or not. If there is a strong click when you press the button, the door switch is still good.

Can you microwave a plastic plate?

The same goes for paper plates. So ensure that you do not use metal or paper plates in a microwave. Also, if you want to place a plastic plate in the microwave, make sure that it has the word “Safe” on it. The “Safe” stamp means that it has been approved by the FDA so you don’t need to worry.

Is it safe to microwave paper plates?

Well, you would be putting yourself in danger if you do not use microwave safe plates. Using paper or metal plates in a microwave is the most dangerous thing to do. The metal would spark which would result in a fire. The same goes for paper plates. So ensure that you do not use metal or paper plates in a microwave.

Why won't my microwave spin?

If the rollers are worn or missing, or the part that connects to the coupler is worn, it can cause your glass tray not to spin at all. This should be checked first because it is also the easiest part to replace. You simply need to take it out and purchase a new one for your specific model of microwave. Sharing.

What to do if your turntable stops working?

If one fails, then the whole system fails. In order to check all the parts, you will need to unplug the microwave and remove the bottom panel to access everything that you need to.

Why does my microwave make a grinding noise?

In order to rotate the turntable, your microwave uses a drive motor. If your turntable doesn’t work anymore or made a grinding noise at any point, it is likely a motor problem. This part is accessed through the bottom of your microwave and looks like a round disk in the center. If the motor was grinding, it definitely needs replaced.

How does a microwave work?

In order to heat food efficiently, your microwaves uses directed heat waves generated from the magnetron. While the waveguide in the microwave cabinet directs the heat towards the center of the food, that same food needs to be rotated for efficient coverage. This is where the turntable, or rotating glass plate, comes in.

Can you turn a microwave tray if the prong is broken?

However, if a prong is broken off your coupler, it will not be able to turn the tray. In many models, you can simply pull the coupler up from within the microwave cabinet. However, depending on your model of the microwave, you may first have to remove the motor.

What to do if your microwave doesn't turn?

If the turntable does not turn check the following: Make sure the turntable is centered and seated properly. On models with a stirrer motor there is a shaft protruding up through the floor of the microwave. Make sure the turntable is securely fastened to this shaft.

What happens if the microwave plate is upside down?

If the turntable plate is upside down it will drag on the floor of the microwave. Check to make sure that there is no food or debris under the "wheels" of the turntable ring. Food can prevent the wheels from moving forward. Be certain you are pressing a cook function rather than a timer function.

Why is my microwave not turning?

If the microwave turntable is not turning the glass tray drive coupling could be broken or stripped out. Gently pull the coupling off the drive motor shaft to inspect the drive coupling for damage.

How to test a turntable motor?

Use a multimeter to test the motor for continuity. If the turntable motor does not have continuity, replace it.

How to check if touchpad is defective?

To determine if the touchpad is defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad. Required Part.

Can a turntable motor be defective?

The user control and display board might be defective. However, the turntable motor is much more likely to be at fault. First, test the incoming power to the turntable motor. If the motor is not getting power, the user control and display board may be defective. If the user control and display board is defective, replace it.

Is the main control board defective?

The main control might be defective. However, the turntable motor is much more likely to be at fault. First, check the incoming power to the turntable motor. If the turntable motor is not getting power, the main control board may be at fault.

Is the touchpad on a turntable defective?

06 - Touchpad and Control Panel. The touchpad and control panel might be defective. However, the turntable motor is much more likely to be at fault. First, test the turntable motor. If the motor is not defective, it is possible that the touchpad and control panel are defective.

Why won't my microwave rotate?

If the turntable on your microwave doesn’t rotate, the problem may be with the drive coupler. Most microwave ovens with a round glass tray use a motor driven coupler to turn the tray on a roller guide. Some models that use a rectangular tray will use a drive coupler that has an offset center roller to drive the tray guide from side to side.

Why is my microwave making a grinding noise?

If the turntable on your microwave doesn’t rotate or is making a grinding noise, the problem may be with the drive motor. Most microwave ovens with a round glass tray use a motor driven coupler to turn the tray or a roller guide. The motor is typically located below the floor of the oven, and access will need to be through the bottom.

What is a roller guide in a microwave?

The roller guide is used to support the tray and to engage the rotating coupler. Remove the tray and then inspect the roller guide.