What does Loc mean on a GM radio?
Most 1990's through early 2000's GM cars and trucks used a theft system to lock the radio when power is lost. If your radio displays the word LOC or INOP you can easily retrieve a set of numbers that enables us to give you the unlock code and instructions.
How do I know if my Radio is locked or not?
The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere.
How do I find the unlock code on my Radio?
If your radio displays the word LOC or INOP you can easily retrieve a set of numbers that enables us to give you the unlock code and instructions. With the key on, hold down the radio preset buttons 1 & 4 (or 2 & 3 on some models) for approximately 10 seconds or until a set of 3 numbers comes up on the display.
What causes a GM TheftLock radio to lock up?
GM Theftlock radios are designed to lock up automatically when the vehicle’s battery dies or becomes disconnected, though an electronic malfunction could also cause the Theftlock function to activate. Tip: If the letters “RDS” appear on the display, it won’t be possible to unlock your radio yourself,...
How to turn on a radio when it is locked?
How to find the time on a theftlock radio?
How to unlock a GM radio?
How to get the hour code on a radio?
How to get the last 2 digits of a retrieval code?
See more
About this website
Why does my car radio say Loc?
Press the power button to turn on the radio. If your radio displays any functions such as playing a CD, cassette, or a radio station, your radio is not locked. If no sound is heard, you may need to replace your radio unit. If your radio is locked, “LOC” is displayed on the screen.
How do I unlock my radio?
Press and hold the Power/Volume button for 40-50 seconds. It should unlock your radio in under a minute....Method 2:Turn on the ignition.If the screen says CODE then turn off the radio.Press Down and the Power Button while holding for 60 seconds.It should bypass the radio and gives you access to music and radio.
What does loc mean on a stereo?
LOC or Line Output Converter: This is a handy little gizmo that will allow you to tap into your speaker wires to grab a signal and then will choke it down to be able to be used as RCA inputs for an amp.
How do you take theft lock off radio?
How Do I Disable Theft Lock?Turn off the ignition.Remove the radio fuse from the fuse box.Wait 30 seconds.Reinsert the fuse and turn on the ignition.Enter the four-digit code followed by pressing the “AM” or “FM” button.
How do I reset my radio?
Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.
How do I reset my car radio code?
Contact a local car radio installation centerTo bypass radio security codes on these vehicles, switch your ignition to the ON position.Turn on your audio system and see if it displays CODE. ... Then, you want to press and hold down the radio power button.You have to hold it for about 40-50 minutes.
How do you set up a LOC?
1:318:28How To Install a Line Output Converter (LOC) To Any Car (Simple)YouTubeStart of suggested clipEnd of suggested clipGoes to ground. And then the blue/white. Which is on your output. Side is your 12-volt remote outputMoreGoes to ground. And then the blue/white. Which is on your output. Side is your 12-volt remote output the blue-white cable is going to be spliced and ran all the way to your amplifier.
How do you adjust LOC gain?
15:4019:50How to TUNE Car Amplifier & Set Gains - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step is actually turning up the volume on your head unit. Until you hear distortion. AndMoreThe first step is actually turning up the volume on your head unit. Until you hear distortion. And then backing off until the distortion.
Does Loc need power?
An Active Line Out Converter is a more advanced version of the standard passive line out converter. These require 12v power to output a signal. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.
How do I get my car out of anti-theft mode?
Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car's system that you have the right key, and will enable you to bypass your car's alarm system.
How much does it cost to unlock a GM radio?
Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio.
How do I unlock my Chevy utility radio?
HOW TO UNLOCK RADIO CODES WITHOUT AN ANTI-THEFT CARDGet in touch with your vehicle's manufacturer ASAP. You'll find the number in the owner's manual or on the Chevrolet website. ... Enter your vehicle's code to unlock the stereo. Once the code unlocks the stereo, you can activate it and adjust the settings accordingly!
How do you unlock a radio in a car?
1:403:27How to unlock factory car radio - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can find the password to unlock the radio in a few different spots. Sometimes the code will beMoreYou can find the password to unlock the radio in a few different spots. Sometimes the code will be on a sticker placed in the glovebox.
What are the radio ten codes?
Walkie Talkie "10 Codes"10-1 = Receiving poorly.10-2 = Receiving well.10-3 = Stop transmitting.10-4 = Message received.10-5 = Relay message to ___10-6 = Busy, please stand by.10-7 = Out of service, leaving the air.10-8 = In service, subject to call.More items...
How do I find my Ford radio code?
How do you find your Ford Radio Code?Turn on your Ford Radio.Hold down either 1 & 6 or 2 & 6 - this will trigger a sequence on your Radio display.Look out for a code starting with either "V" or "M" - this code is required to retrieve your radio code.
How do I bypass Theftlock on a GM radio?
Dial 1-800-537-5140 to connect with GM's toll-free radio hotline. Once you're connected, you'll be asked to provide your vehicle's radio identification number, along with a special dealer access code. You'll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How to unlock radio code and use vin relearn by gm tech 2?
Here is the step-by-step instruction on clear radio theftlock for GM (GM, SAAB, OPEL, SUZUKI, ISUZU and HOLDEN) models with GM Tech 2 scan tool.
How to Unlock GM Navigation Radio: Steps By Step Guide
The GM radio hotline is 1800 537 5140, which is toll-free and automatically available 24/7. You can contact them using this number to ask for your problem to be resolved, and of course, you can call at any time.
STEP 1
With the key on, hold down the radio preset buttons 1 & 4 (or 2 & 3 on some models) for approximately 10 seconds or until a set of 3 numbers comes up on the display. Write the numbers down.
STEP 2
Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. We will then use those numbers to get the unlock code. Give us those numbers during checkout below.
STEP 3
Only $9.95. Use any major credit / debit card or PayPal. The Unlock code and simple instructions to enter it will be sent by e-mail.
How to turn on a radio when it is locked?
1. Put your key in the ignition and turn on your radio. Start your vehicle like normal, or turn the key until it's in the “On” or “Accessory” position. Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked.
How to find the time on a theftlock radio?
On most Theftlock radios, you’ll find the time set buttons in the lower righthand corner of the radio interface.
How to unlock a GM radio?
1. Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How to get the hour code on a radio?
1. Press the hour button on the radio until the first 2 numbers of the code appear. With each button press, the number displayed will increase by 1. Continue ticking off the numbers in the hour position until they match the first half of your radio retrieval code.
How to get the last 2 digits of a retrieval code?
Hit the minute button to bring up the last 2 digits of your retrieval code. To finish entering the code, do the same thing that you just did to put in the first 2 digits, only this time with the numbers in the minute position. Double-check that each number of the code is correct before proceeding.
How to turn on a radio when it is locked?
1. Put your key in the ignition and turn on your radio. Start your vehicle like normal, or turn the key until it's in the “On” or “Accessory” position. Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked.
How to find the time on a theftlock radio?
On most Theftlock radios, you’ll find the time set buttons in the lower righthand corner of the radio interface.
How to unlock a GM radio?
1. Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How to get the hour code on a radio?
1. Press the hour button on the radio until the first 2 numbers of the code appear. With each button press, the number displayed will increase by 1. Continue ticking off the numbers in the hour position until they match the first half of your radio retrieval code.
How to get the last 2 digits of a retrieval code?
Hit the minute button to bring up the last 2 digits of your retrieval code. To finish entering the code, do the same thing that you just did to put in the first 2 digits, only this time with the numbers in the minute position. Double-check that each number of the code is correct before proceeding.
