The most common reasons include the following possibilities:
- Evaporation
- Running the hot tub during the winter
- A leak in the hot tub
- High hot tub usage
Why is my hot tub cover waterlogged?
When the problem of why your hot tub cover is waterlogged, it should be as easy to fix as it was to find out the reason most of the time. Typically, when a hot tub’s vinyl lining in the cover begins ripping, tearing, or begins to deteriorate, the foam in the lining will begin to absorb the water from within the hot tub.
What happens if you don’t maintain your hot tub cover?
Large quantities of water trapped in the foam along with mildew and mold growth will occur if you do not properly maintain your cover. Although there’s many things you can do to prevent waterlogging, it can still creep up on you and affect your hot tub experience.
How to fix a ripped or torn hot tub cover?
When it comes to the foam of the hot tub cover, that could also be suffering from a rip or tear as well. If this is the case with the foam for your hot tub cover, you’ll be applying a patch to the foam, too. Purchase some foam to insert to the area and apply a patch to both sides. This will provide maximum security and protection to the site.
Is your hot tub water cloudy and how to fix it?
It’s a common problem and it is usually an easy fix. To safely enjoy your hot tub, your water should be clear enough that you are able to see the bottom of the spa. When the water is cloudy, it’s a sign there is a problem. It is important to figure out why your water is cloudy and how to fix it.
How do you fix a saturated hot tub cover?
To fix a waterlogged hot tub cover, take the following steps:Remove the waterlogged hot tub cover.Remove the vinyl lining from the hot tub cover.Dry the foam that was inside the vinyl covering.Clean the vinyl covering.Wash the area around the vinyl.Roughen the patch site before applying it to the vinyl.More items...•
How do I get water out of my hot tub cover?
Attempting to rescue your hot tub cover Very carefully unzip the vinyl 'skin' and remove each piece of the foam core. Stand or lay the foam in a sunny part of your yard to allow air to pass under them. Turn the vinyl cover inside out and towel the inside of the cover dry. Lay it in a sunny spot as well.
Why does my hot tub cover get so heavy?
The main reason why the cover gets heavier with time is that the foam core becomes waterlogged. The water that's being soaked into the core makes the cover heavy. And once that occurs the cover becomes not effective at protecting your hot tub from the elements.
Can a waterlogged hot tub cover be repaired?
If your hot tub cover became waterlogged due to a pierce in the vapour barrier, you may be able to fix it by drying the foam out and repairing the hole in the vapour barrier, otherwise, you are likely better off simply buying a new hot tub cover.
How do you dry out a hot tub?
Top Tip: You can use the massage blower to help dry any remaining droplets of moisture. Attach the motor unit, put the cover on your hot tub and turn on the massage system for 30 seconds. Then turn it off and take the cover off. Now turn the massage system back on for another 30 seconds.
How often should you replace hot tub cover?
every 5–7 yearsHow long does a hot tub cover last? On average, a hot tub or swim spa cover will need to be replaced every 5–7 years. While some covers are built to last much longer than others, any object that is subjected to the elements will eventually show signs of wear.
What is a vapor barrier on a hot tub cover?
By repelling the water vapor, “Vapor Guard” is able to keep any moisture from reaching the foam board in your cover, and allows it to maintain its original weight and insulation value. Utilizing aluminum for applications in radiant barrier and vapor barriers is no novel concept.
Can I replace the foam in my hot tub cover?
Q: Can the foam panels inside of a Hot Tub Works cover be replaced without buying the entire cover? A: Yes!
What causes a hot tub cover to get waterlogged?
When that happens it’s easy for moisture from the hot tub or rain to get inside the vinyl cover.
Why does my hot tub cover feel soggy?
Typically, when a hot tub’s vinyl lining in the cover begins ripping, tearing, or begins to deteriorate, the foam in the lining will begin to absorb the water from within the hot tub. It will be very clear when this starts to occur because the hot tub cover will start to feel heavy and a bit soggy when you try to move it.
What is the best product for cleaning hot tub covers?
There’s actually no better product on the planet for cleaning hot tub covers than 303 UV Protectant (click to learn more on Amazon).
How long does a hot tub cover last?
Determine whether or not the hot tub cover can be saved. Attempt to save the hot tub cover. If all else fails: Replace it. Well maintained, a hot tub cover should last you 5-7 years.
How heavy is a hot tub cover?
After all, a hot tub cover is heavy! Depending on the size of your hot tub, the cover could weight anywhere from 35-70 lbs. But about 45 lbs is probably about average. So my family would basically just fold the top of the cover in half and then push it to the edge of the hot tub and let it slide down the side.
What to do if your hot tub is too heavy?
The first thing you are going to have to do is remove the hot tub cover. If the cover is too heavy, don’t try to muscle it by yourself and risk injury. It’s not worth it. Get some help in removing the cover, so you don’t have an unplanned trip to the doctor’s office.
Can a waterlogged hot tub cover insulate?
As previously mentioned, while a waterlogged hot tub cover may still keep leaves, branches, other things out of your hot tub, it will still pull large amounts of heat from the water and won’t insulate it, driving up the operating cost of your hot tub.
Why is my hot tub cover filling up with water?
Your hot tub cover will fill with water if it is not water-resistant or damaged and has a leak or crack. Hot tub covers usually become heavy because the foam gets waterlogged.
How do I stop rain pooling in my hot tub?
To stop your tub from getting rain pooled, you need to use a durable hot tub cover along with other essential accessories.
Will waterlogged Styrofoam dry out?
In general, waterlogged Styrofoam will be challenging to dry out without removing it from the outside cover. If it is possible, it will take an extremely long time. And during this time, depending on the location, new moisture may be even added instead of removed. Ensure that you also fix the reason why it got waterlogged.
What causes a hot tub cover to get waterlogged?from hottubownerhq.com
When that happens it’s easy for moisture from the hot tub or rain to get inside the vinyl cover.
Why does my hot tub cover feel soggy?from hottubownerhq.com
Typically, when a hot tub’s vinyl lining in the cover begins ripping, tearing, or begins to deteriorate, the foam in the lining will begin to absorb the water from within the hot tub. It will be very clear when this starts to occur because the hot tub cover will start to feel heavy and a bit soggy when you try to move it.
How do hot tub covers get damaged?from niagarahottubs.com
The most common way hot tub covers get damaged is through punctures or deterioration of the vinyl covering – the ‘skin’ or the foam’s protective vapour barrier bag/covering, which serve to prevent moisture from entering the high-density foam.
What is the best product for cleaning hot tub covers?from hottubownerhq.com
There’s actually no better product on the planet for cleaning hot tub covers than 303 UV Protectant (click to learn more on Amazon).
How long does a hot tub cover last?from hottubownerhq.com
Determine whether or not the hot tub cover can be saved. Attempt to save the hot tub cover. If all else fails: Replace it. Well maintained, a hot tub cover should last you 5-7 years.
What to do if your hot tub is too heavy?from hottubownerhq.com
The first thing you are going to have to do is remove the hot tub cover. If the cover is too heavy, don’t try to muscle it by yourself and risk injury. It’s not worth it. Get some help in removing the cover, so you don’t have an unplanned trip to the doctor’s office.
How heavy is a hot tub cover?from hottubownerhq.com
After all, a hot tub cover is heavy! Depending on the size of your hot tub, the cover could weight anywhere from 35-70 lbs. But about 45 lbs is probably about average. So my family would basically just fold the top of the cover in half and then push it to the edge of the hot tub and let it slide down the side.
Pro: well water is cheaper
If you already have the set-up to pump water from your well, then you will find that the cost is considerably cheaper than using any other water source. You aren't really paying for that water that you are taking out of the ground. Sure, water isn't necessarily expensive when you get it through more conventional sources either.
Con: well water can be tough to balance
As you likely know, the water in your hot tub needs to be constantly balanced to ensure that the pH, TA, and calcium hardness levels are just right.
Con: well water may leave residue on your hot tub
Even if you do work incredibly hard to balance your well water, it is much more likely to leave residue and staining in your hot tub. This is because you are probably never going to be able to get that water absolutely perfect.
Con: your neighbors may not be happy
While a hot tub doesn't really use a lot of water spread out over time, it does use a fair amount at once to fill it. If your well is shared with your neighbors, then they may not be huge fans of you completely draining the well in order to fill up your hot tub.
Professional recommendation
In my opinion, there is no problem with using well water to fill a hot tub in most cases, so I suggest that you use a well if you have it available.
Why does my hot tub leak water?
A hot tub that leaks out the same amount of water after each fill is usually indicative of a leak in the jet assembly. You can also narrow your search by determining if your hot tub leaks faster with the pump running or when it is off. Hot tubs that leak quickly with the pump running usually means there is an issue on the pressure side (the lines after the pump), while hot tubs that leak more slowly with the system on usually have an issue on the suction-side of the plumbing (the lines before the pump).
How to tell if a hot tub is leaking?
Some hard-to-see, hairline cracks can be found by running your fingers around the shell. You should be able to feel a subtle difference once you come upon a crack. While some cracks are simply cosmetic imperfections, others can cause your hot tub to leak over time. With the acrylic shells of modern hot tubs, cracks that lead to leaks are normally not an issue, but it is a more likely scenario than that herd of elephants we mentioned earlier.
What happens when you put on your bathing suit and remove the cover?
But, after putting on your bathing suit and removing the cover, you discover there is no water in your hot tub.
Do hot tub jets have their own connections?
Sometimes it’s easy to forget that the jets and nozzles also have their own connections and fittings. If after filling your hot tub you notice that the water only drains to a particular level, examine the jets directly above the water line.
Is a hot tub plumbing system complex?
If you’ve read our article on how hot tub plumbing works then you’re already familiar with how complex hot tub plumbing systems can be. Yes, a hot tub’s plumbing is complex, but don’t let that deter you from investigating the leak and arriving at a solution. These bits of advice will help you in your search:
Why does my hot tub cover get soggy?from hotspringspools.net
If your cover’s vinyl lining develops holes or begins to deteriorate, the water from your hot tub will seep into the foam of your cover. You’ll know this has happened by the way the hot tub cover feels heavy and soggy.
How to fix a waterlogged hot tub cover?from hotspringspools.net
To resolve the waterlogged cover problem, start by removing the hot tub cover from the tub. Next, remove the damp foam from the vinyl lining and lay it out in a sunny area where it can dry out. While the foam is drying, take time to clean out the vinyl with a cleaner that combats mildew and mold (and avoid having to deal with a foamy hot tub ).
How to patch a hole in a car?from hotspringspools.net
The patch kit will come with instructions, but we have some basic pointers as well. First, trim the edges of the tear so that they’re not jagged, and trim the patch so that it’s about one inch larger than the hole on all sides. To keep the edges of the patch from curling, cut rounded edges around the patch.
When is it time to replace a hot tub cover?from hottubfocus.com
Often the vinyl becomes cracked with age, exposure to UV light and also die to chemical attack. Hot tub covers generally last only a few years so, over the life time of your hot tub you would expect to have to replace your cover a few times.
Can you put new foam cores in a hot tub?from hottubfocus.com
New foam cores are readily available either online or from your hot tub supplier and are relatively inexpensive and easy to fit. However, it is false economy to fit new foam cores into a damaged vinyl cover.
Can you patch a hole in a hot tub?from hotspringspools.net
Make sure you avoid the edges of the hole though. Remember, you want the edges to be smooth, but the surrounding area should be a little rough. If the hole in your hot tub cover has not only torn the vinyl liner, but it has also penetrated the foam, you’ll need to patch the foam as well.
Do hot tub covers have a convex center?from hottubfocus.com
You will also probably notice that most hot tub covers have a convex or raised centre portion to them. This allows rainwater to drain off the cover and also helps provide some additional strength as well. It is also usually the case that the more dense and thicker the hot tub cover is the better insulator it will be and also the stronger it will be as well. Naturally, the stronger, thicker and more thermally efficient hot tub covers are more expensive too!
Why is my Hot Tub Water Cloudy and How to Fix it?
Is your hot tub water cloudy? Don’t worry! It’s a common problem and it is usually an easy fix.
How to clear the cloudy water in your hot tub?
Getting your hot tub water back to normal should not be too difficult. The first step is to ensure that your water is chemically balanced before anything else.
What is the alkalinity of hot tub water?
Alkalinity measures substances in your water like hydroxides, carbonates, and bicarbonates. When they are balanced (in appropriate amounts), these elements will keep your water from getting cloudy and bacteria from forming. When you test your hot tub water, the alkalinity levels should be between 80-120 parts per million.
Why does water turn green?
Odors and algae form when organic matter feeds bacteria in the water, which then makes the water turn green and cloudy
What is the pH level of a hot tub?
An elevated pH level can also create cloudy water, eye or skin irritation, tartar buildup and keep chlorine from functioning properly. The ideal pH level should be between 7.2 – 7.6.
Why is my water cloudy?
Typically, cloudy water is blamed on an elevated pH level, an elevated alkalinity level, and a low level of sanitizer. Other reasons for cloudy water can include dirty filters, body oils and fluids, and old water.
How to get rid of sanitizing residue in hot tub?
Once the chemicals in your hot tub have been balanced, add a chlorine-free shock treatment to your water. This treatment will help clear your water by oxidizing organic matter before it can feed any bacteria. It will also help get rid of any leftover sanitizing residue.
