So Why is my Subwoofer Not Working?
- 1. Driver Magnet Failed As mentioned before, all subwoofers have a cone that is attached to the permanent driver magnet. It is located under the cone and is not by itself an electromagnet. ...
- 2. Magnets near the Speaker Now you know that the circuit already has a magnet. ...
- 3. Cone Seal Failed ...
- 4. Because of a Short Circuit ...
- 5. Not Enough Power ...
Why is my subwoofer not working but my amp is working?
Every time your subwoofer doesn’t work, but the AMP has power, start by checking the volume level. If the volume is okay, the next thing is to inspect the inputs and ensure they are working correctly. Then if that doesn’t solve the problem, check and fix in faults in wiring. But if none of those hacks works, check your speakers.
What to do if your subwoofer stops working?
If your subwoofer stopped working, there’s a good chance it was blown. To check, unplug the subwoofer and plug it back in. If it still doesn’t work, try switching the input from AUX to SUBWOOFER on the amp. If that doesn’t work, the subwoofer is probably blown and needs to be replaced. Subwoofer suddenly stopped working what to do?
Why won’t my car speakers work?
This happens mostly when the subwoofer is overheating – something which is common. Other times your speakers could be completely damaged. And if the speakers are damaged, they won’t work despite all other components working perfectly. So, when the speakers are damaged, the next thing to do is remove and replace them with new and quality speakers.
How to tell if a subwoofer is blown?
When the amp has power and the subwoofer is not working you need to check the following: How to Tell If a Sub Is Blown? Subs are blown when they get too much power or the incoming signal is too distorted. You know that this is the problem by simply listening to music or checking the woofer’s movement.
What to do if your subwoofer doesn't turn on?
How to make sure subwoofer doesn't receive signal?
How to check if subwoofer is working?
What to do if your subwoofer is not lit?
Where is the input on a subwoofer?
Do subwoofers need a fuse?
See 3 more
About this website
Why is my subwoofer not powering on?
If your subwoofer stopped working, the first thing you should do is check the fuse. If it's blown, replace it and see if that fixes the problem. If it doesn't, then there may be something else wrong with the subwoofer and you'll need to take it to a technician for repair.
How can I tell if my subwoofer fuse is blown?
Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown.
How does a subwoofer get power?
A subwoofer (sub) is speaker, that is dedicated to the reproduction of low-pitched audio frequencies most commonly referred to as bass. Passive Sub: Passive subs are called passive because they need to be powered by an external amplifier or Audio/Video (A/V) receiver . This is similar to traditional speakers.
Why is my sub not working but amp is on?
Commonly, a blown subwoofer, issues with the connection and wiring, volume and other settings, input problems, short circuits and issues with the speaker can be some potential reasons behind a subwoofer not working even if the amp has power. Luckily, this is something that you can fix by taking a few simple steps.
Why did my subwoofer suddenly stop working?
If the subwoofer still doesn't power on, try plugging it into a different outlet that you know works properly. As with the speaker wires, inspect the subwoofer's power cable for any damage or defects. Some subwoofers are equipped with a fuse, which may or may not require removal of a back plate.
Where is the fuse in a subwoofer?
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks.
Does a subwoofer need a power source?
Passive subwoofers require an additional power source like a receiver or amplifier. Active subwoofers include a built-in amplifier and power source and only need to receive an audio source.
How much power does a subwoofer need?
How much power does a subwoofer use? Most subwoofers use about 150-1000 watts in order to reproduce the sound that they are receiving. The amount of power can be increased by using an amplifier, but if you just want something small and compact, then it is best to stick with speakers that only require 20 or so watts.
How many volts does a subwoofer need?
As you know the subwoofer installed in your car works on battery that delivers 12 volts to all your audio setup.
Do subwoofers have fuses?
If you have a DB12 subwoofer that is not turning on or has no power, you may need to replace the fuse.
How do you test a powered subwoofer?
0:462:49How To Test A Subwoofer To See If It Works A Quick Test - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause I don't have my antenna hooked up the easy way to test to see if your sub is working and theMoreBecause I don't have my antenna hooked up the easy way to test to see if your sub is working and the speakers do hit is just tap this because it's hooked in.
Why am I not getting any power to my amp?
If the ground connection is poor or isn't connected at all, the amp might fail to turn on or not work very well. If the amp has good power and ground, the remote wire has voltage when the head unit is turned on, and no fuses are blown, then you're probably dealing with a busted amplifier.
How do you test a subwoofer to see if it works?
0:462:49How To Test A Subwoofer To See If It Works A Quick Test - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause I don't have my antenna hooked up the easy way to test to see if your sub is working and theMoreBecause I don't have my antenna hooked up the easy way to test to see if your sub is working and the speakers do hit is just tap this because it's hooked in. So you hear that.
How do you know if a sub is broken?
After the subwoofer is properly broken in, you'll notice it plays deeper, with more dynamic range, and increased output. What's physically happening to the sub is the resins in the spider pack begin to break apart and soften.
Can you fix a blown subwoofer?
Can you fix a blown subwoofer? Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.
Why does my subwoofer smell like burnt rubber when it plays?
If you notice that your subwoofer smells like burnt rubber when you are playing it then this is because your voice coils are getting hot and causing this burning rubber smell to come into the air.
What would cause my subwoofer to suddenly stop working?
I owed the Boston Acoustics CSSUB10B subwoofer for about 9 years and was always happy with it. I live in an apartment, so it delivers enough bass for me in my small home theater. But the subwoofer seems to have stopped working recently. The funny thing is, it still turns on and receives...
i have a home power subwoofer that turns on but no sound o… - JustAnswer
Thanks for the reply. You would need to locate the output transistors that are directly coupled to the heatsink on the amp. Use a multi-meter to verify that no pins are shorted to one another, if they are then this output is shorted and needs replacing.
Why won't my subwoofer work?
The subwoofers are connected to speaker wires and power sources. This wiring is mostly found underneath the dashboard. And if there is a problem with the wiring, then the subwoofer won’t work.
How to fix a car subwoofer that is not working?
1. Check The Volume. When the car subwoofers are not working, but the AMP has power, the first thing you need to do is to check your volume level. Try and turn it on. This is the first thing that should come to your mind before trying any other solution.
Why is my speaker wire loose?
Sometimes the speaker wire get’s loose or broken. This happens mostly when the subwoofer is overheating – something which is common. Other times your speakers could be completely damaged.
Why does my car fuse blow up?
The fuse blows up when there are power upsurges in your car. It blows to break the circuit and prevents further damages to the subwoofer. Car wiring can be complicated. Unless you are an expert or confident with checking it yourself, we recommend that you get a skilled mechanic to check the wiring.
How to check if AMP is working?
If your AMP is working correctly, but you can’t hear any sound coming from the subwoofer, check your input. Ensure your system is receiving an input signal. First, start by checking whether the input cables are plugged. Look at the head unit. If it’s plugged already, unplug it.
What to do if your radio tuner is not working?
In case you find our inputs are not working, you need to replace them with quality and durable inputs.
What to do if your speakers are damaged?
And if the speakers are damaged, they won’t work despite all other components working perfectly. So, when the speakers are damaged, the next thing to do is remove and replace them with new and quality speakers.
Reasons Why Your Subwoofer Is Not Hitting Hard Enough
The function of subwoofers is to emit low-frequency sounds. These make the bass tones rich and enhance the overall quality of the sound.
Why Does My Subwoofer Sound Weak?
If you are reading this article, you might have this question—why does my car subwoofer sound weak, exactly? What are the precise causes behind this? Let’s go through some of these causes in detail so that you can assess your subwoofer on your own and determine the issue.
How to Tell When a Subwoofer Is Bad
It can be a bit difficult to tell when a subwoofer is bad while buying it or even once you start using it. Apart from the sound quality itself that becomes weak, you should also look out for some other criteria when it comes to this unit.
How to Make the Subwoofer Sound Better
Now that you have determined the causes behind your subwoofer sounding weak, how can you make it sound better? Let’s take a look at some ways.
Wrapping up
Subwoofers can greatly enhance the sound quality and transform your listening experience. Whether you are a professional using them in your studio or an amateur using them in your car or home, you will appreciate the difference they make.
FAQ on Why is my subwoofer not hitting hard
There are many things that could cause your subwoofer to sound weak. First, make sure that the problem lies with your subwoofer by testing it with a track full of low-frequency sounds.
How To Take Care of Subwoofers?
Taking care of your subwoofer in other words means cleaning it regularly. After using a subwoofer for a while, dust makes the subwoofer its home.
Is It Time to Replace My Subwoofer?
We hope that by now your pc subwoofer not working issue has been solved .
What to do if your subwoofer doesn't turn on?
If the subwoofer still doesn't power on, try plugging it into a different outlet that you know works properly . As with the speaker wires, inspect the subwoofer's power cable for any damage or defects. Some subwoofers are equipped with a fuse, which may or may not require removal of a back plate.
How to make sure subwoofer doesn't receive signal?
If the input device offers speaker size settings, choose the smallest option first; sometimes setting the speaker size to something larger makes it so that the subwoofer doesn't receive a signal.
How to check if subwoofer is working?
Check the volume level on the subwoofer and receiver or amplifier before sending any audio input. Start the volume low and gradually increase it to determine if the subwoofer is working correctly . Choose music test tracks that feature low-end bass content so there is no question one way or another.
What to do if your subwoofer is not lit?
If it's not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip. If a plug's prongs slip out halfway—it's often enough to prevent the flow of power— gently bend them so the cable will stay connected after you let go.
Where is the input on a subwoofer?
The inputs on the back of the subwoofer generally plug into the subwoofer output on the back of receivers or amplifiers. If the subwoofer connects to speaker outputs on the receiver or amplifier, inspect the entire length of wire connections for defects.
Do subwoofers need a fuse?
Some subwoofers are equipped with a fuse, which may or may not require removal of a back plate. If the fuse is a feature, and if you're comfortable tinkering with electronics, check to see if it needs replacing. Otherwise, consult the manufacturer or local repair shop first. Check system and menu settings.
