Common solutions for: Whirlpool Refrigerator ice and water dispenser not working
- Dispenser Control Board. The dispenser control board governs most of the functions of the dispenser system. ...
- Dispenser Switch. The dispenser switches send voltage to the dispenser. ...
- Door Switch. The door switch turns off the ice and water dispenser when the refrigerator door is open. ...
- Main Control Board. The main control board might be defective. ...
How to fix a whirlpool refrigerator not cooling?
Whirlpool Refrigerator and Freezer Not Cooling – How to Fix 1. Condenser Coils Are Dirty. Check the condenser coils to see if they are dirty. If they are clogged with dirt, they... 2. Evaporator Fan Motor is Bad. If the fan blades don’t spin freely or if the motor is noisy, then you know the motor ...
Why is my Whirlpool refrigerator not working?
- Locate the Condenser coils – On most refrigerators, they’re behind the rear access panel, at the bottom of the refrigerator door. ...
- Unplug the Whirlpool Refrigerator.
- Carefully remove the fridge panel or grille to access the coils.
- Clean the coils and the area around them gently, using a vacuum hose attachment.
How to reset a whirlpool refrigerator [Quick Guide]?
To reset your Whirlpool ice maker, you’ll need to do the following:
- Check which model of Whirlpool ice maker you own.
- If your model has a red reset button at the bottom, push this in and hold it for 10 seconds, before releasing.
- If there’s no reset button, carefully pull out the refrigerator from the wall and take the plug out.
- Wait 30 seconds, then plug your refrigerator back in again
What are some common Whirlpool refrigerator problems?
Common Whirlpool refrigerator problems include the refrigerator not running, the lights not working, temperature issues and the appliance making excessive noise. The majority of these common issues can be solved without the help of a professional. If the refrigerator is correctly plugged in yet does not run, the temperature setting, evaporator ...
Why won't my refrigerator water flow?
Why is my Whirlpool refrigerator water line freezing?
How to get ice out of a Whirlpool refrigerator?
Why is my Whirlpool ice maker not working?
How to get ice out of a freezer?
How to defrost a water line?
What does a dispenser switch do?
See more
How do you reset the water dispenser on a Whirlpool refrigerator?
After changing the water filter, reset the status. Press and hold the "WATER FILTER" button for 3 seconds. When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.
Why is water not coming out of my refrigerator water dispenser?
Water filters should be replaced every six months on average. If you can't remember replacing your water filter, it's probably time to change it. These filters can get clogged over time causing the water flow to be disrupted and thus, preventing the water dispenser from functioning properly.
Why does my ice maker work but not the water dispenser?
Frozen Tank or Tubing: The water reservoir tank or tubing could be frozen. If frozen, you would get water to the icemaker but not the dispenser. The water reservoir tank or tubing is typically located behind the vegetable drawers or on the left side of the fresh food compartment.
Why is my Whirlpool refrigerator not dispensing ice or water?
Whirlpool Refrigerator Control Lock is Activated If you find your Whirlpool refrigerator water and ice dispenser not working, first determine if the Control Lock is enabled. The Control Lock feature turns off the dispenser to prevent accidental activation or enable easy cleaning.
What do you do when your water dispenser stops working?
0:592:28Troubleshooting Water Dispenser Issues - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the water supply has been properly installed. Make sure that the water line is not kinkedMoreCheck that the water supply has been properly installed. Make sure that the water line is not kinked. And make sure that the water supply is turned on if an issue is found with the water supply.
How do I fix my water dispenser?
2:093:59How to Fix a Leaking Water Dispenser/Water Cooler (It may be ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the quick fix to fixing most of cooler leaks would be to change the bottle. Taking out taking offMoreSo the quick fix to fixing most of cooler leaks would be to change the bottle. Taking out taking off the existing bottle. And putting on a new bottle uh in its place monitor it for about 24.
How do I unlock my refrigerator water dispenser?
1:094:13SAMSUNG FRIDGE: HOW TO LOCK/UNLOCK THE WATER and ...YouTubeStart of suggested clipEnd of suggested clipRight you hold it for three seconds. And you just need okay so all you need to do is once you doMoreRight you hold it for three seconds. And you just need okay so all you need to do is once you do that setting all right it's locked you see the water slash ice is locked.
How do I fix the ice and water dispenser on my Whirlpool refrigerator?
Here's how to reset Whirlpool ice maker and remove jammed ice:Unplug the refrigerator.Open the refrigerator door with the ice dispenser.Locate the chute where the ice drops down.Slide a long wooden spoon into the jammed ice in the chute to break up clumps and remove the blockage.Close door and plug in refrigerator.
Why won't my refrigerator water flow?
When you press the button on your refrigerator control panel to release water or ice, this command sends an electrical signal to the water inlet valve. The valve then allows water or ice to flow. Sometimes the water inlet valve or its tubing can be faulty or become damaged with time. When this happens ice or water won’t flow and the valve should be professionally replaced.
Why is my Whirlpool refrigerator water line freezing?
A frozen water line is another common cause of a Whirlpool refrigerator water and ice dispenser not working. If your Whirlpool refrigerator water line keeps freezing we recommend checking the freezer temperature to make sure its between 0 and 5degrees Fahrenheit. Any lower, and your water line will keep ...
How to get ice out of a Whirlpool refrigerator?
Open the refrigerator door with the ice dispenser. Locate the chute where the ice drops down. Slide a long wooden spoon into the jammed ice in the chute to break up clumps and remove the blockage. Close door and plug in refrigerator. Image from Whirlpool.
Why is my Whirlpool ice maker not working?
If you have a Whirlpool ice maker not working but water dispenser is working, it may be because the ice maker is turned off. Many Whirlpool refrigerators use a wire shut-off arm to turn the ice dispenser on and off. The arm automatically stops ice production when it’s in the raised position.
How to get ice out of a freezer?
Place the ice maker on a towel on your counter. Plug a hairdryer into a nearby outlet and turn it on, holding it near the fill tube that protrudes from the freezer wall. Blow the dryer for about 15 minutes until ice falls out and water stops dripping from the tube.
How to defrost a water line?
Here’s how to defrost a frozen water line: Unplug the refrigerator. Turn off the water supply valve. Loosen the two screws holding the ice maker to the freezer wall. Lift up to remove the ice maker from its brackets.
What does a dispenser switch do?
The dispenser switch is what actually supplies power to the water inlet valve, allowing water or ice to flow. If the switch isn’t working, the water inlet valve won’t receive the signal to release water or ice and neither will dispense.
What happens if the door switch on a refrigerator fails?
The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
What happens if a dispenser control board is faulty?
If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.
How to tell if a dispenser switch is defective?
To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
How much pressure does a water inlet valve need?
The water inlet valve supplies water to the water dispenser. The water inlet valve requires a minimum of 20 psi to function properly. Check the water flow and test the pressure to determine if it is at least 20 psi.
What pressure does a water dispenser need to be to work?
The valve requires at least 20psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.
What temperature should a freezer be kept at?
In addition, ensure that the freezer is kept at the proper temperature. The freezer temperature should be kept from 0-10 degrees Fahrenheit.
What happens if the door switch on a refrigerator fails?
The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
What does it mean when a dispenser is not working?
If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
How to tell if a dispenser switch is defective?
To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
Why won't my fridge stop dispensing water?
If the signal is not recognized correctly, the fridge will not know to stop dispensing water.
Why does my refrigerator keep displacing water?
However, most refrigerators have a lever that needs to be depressed to access ice . This level can be found in the space provided for the glass and will activate when the glass is inserted.
What to do if Whirlpool fridge keeps dispensing ice?
If your Whirlpool fridge keeps dispensing or is not dispensing ice or water, the most common things to check first are stuck buttons, sticky levers, unclosed doors, and frozen water tubes. Try cleaning the control panel, ensuring the door is closed correctly, and that the freezer is not too cold.
How to fix a touch screen that is not working?
This can be done simply by unplugging the appliance and leaving it without power for 10-15 minutes . Once reconnected to power, the internal program will be restarted fresh.
Why are my buttons stuck in my refrigerator?
Stuck buttons: Due to the debris that can accumulate in a kitchen, it is not uncommon to find the buttons on your refrigerator becoming stuck. Over time, particles in the air, such as flour and sugar, along with moisture and grease will build up in areas that are overlooked during cleaning. If this happens, water may continue to dispense even after you release the button.
Why does a lever stick to ice?
Grease and other particles can gather inside the space in the same way it does around buttons. If enough grease and particles accumulate, the lever can stick in the ‘on’ position, and ice will continue to flow.
Where is the water filter on a refrigerator?
Replace the water filter. The water filter is often found either in the unit’s door or at the bottom of the fridge behind a panel or grill. Carefully remove the filter and inspect for build-up. At this point, you could try to dispense water to check the flow. If the flow returns to normal, you will know the filter was the cause of the problem.
Why won't my refrigerator water flow?
When you press the button on your refrigerator control panel to release water or ice, this command sends an electrical signal to the water inlet valve. The valve then allows water or ice to flow. Sometimes the water inlet valve or its tubing can be faulty or become damaged with time. When this happens ice or water won’t flow and the valve should be professionally replaced.
Why is my Whirlpool refrigerator water line freezing?
A frozen water line is another common cause of a Whirlpool refrigerator water and ice dispenser not working. If your Whirlpool refrigerator water line keeps freezing we recommend checking the freezer temperature to make sure its between 0 and 5degrees Fahrenheit. Any lower, and your water line will keep ...
How to get ice out of a Whirlpool refrigerator?
Open the refrigerator door with the ice dispenser. Locate the chute where the ice drops down. Slide a long wooden spoon into the jammed ice in the chute to break up clumps and remove the blockage. Close door and plug in refrigerator. Image from Whirlpool.
Why is my Whirlpool ice maker not working?
If you have a Whirlpool ice maker not working but water dispenser is working, it may be because the ice maker is turned off. Many Whirlpool refrigerators use a wire shut-off arm to turn the ice dispenser on and off. The arm automatically stops ice production when it’s in the raised position.
How to get ice out of a freezer?
Place the ice maker on a towel on your counter. Plug a hairdryer into a nearby outlet and turn it on, holding it near the fill tube that protrudes from the freezer wall. Blow the dryer for about 15 minutes until ice falls out and water stops dripping from the tube.
How to defrost a water line?
Here’s how to defrost a frozen water line: Unplug the refrigerator. Turn off the water supply valve. Loosen the two screws holding the ice maker to the freezer wall. Lift up to remove the ice maker from its brackets.
What does a dispenser switch do?
The dispenser switch is what actually supplies power to the water inlet valve, allowing water or ice to flow. If the switch isn’t working, the water inlet valve won’t receive the signal to release water or ice and neither will dispense.
