Quick answer: yes, you can re-stain with Sikkens Cetol in a different color. SIkkens cetol is a penetrating stain, but it forms a slick surface that often does not play nice with others. As long as you stick with the same product you can change the color and it should be fine be fine.
Full Answer
Can I Re-Stain with Sikkens cetol?
Quick answer: yes, you can re-stain with Sikkens Cetol in a different color. SIkkens cetol is a penetrating stain, but it forms a slick surface that often does not play nice with others. As long as you stick with the same product you can change the color and it should be fine be fine.
What is the best Sikkens stain?
We are a stocking sikkens dealer for the hard to find origina l penetrating Sikkens SRD oil formula (550 voc) not the RE version found in box stores. Sikkens Cetol Dek, SRD, and Log Home stain are all rated very high on most deck stain sites and by any contractor or expert painter.
What does it mean when Sikkens fails?
Sikkens is a film forming stain, kind of like a transparent paint. Over time, it fails. Failing means that it changes color significantly, or it no longer repels water. At this point, it may give up its hold on the wood and flake off, it may just turn color, or it may still be clinging to the wood, and just not doing its job.
Can I use Sikkens translucent finishes on my home?
In order to use any of the Sikkens translucent finishes on your home, the other product must be removed. Please refer to the Previously Coated Wood section in the Sikkens Application Guide or contact your local Sikkens dealer for assistance with removing the current product from your home.
Can you stain over sikkens cetol?
Not all stains are compatible with marine wood finish systems such as Sikkens Cetol Marine. It is recommended that Cetol Marine be applied directly to bare wood, or to a previously applied Cetol Marine finish that's in good condition, and not to stain or wood finishes other than Cetol Marine.
How do you remove Sikkens from wood?
Put the stain remover on with roller and brush, or sprayer, let it sit for 20 min, repeat that process power wash immediately don't let the product dry or you will be wasting time and material while power washing use uniformity and preciseness.
How long does Sikkens stain last?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side.
Can you recoat cetol?
Note: Once you apply Sikkens ProLuxe Cetol Maintenance RE removal of all product is necessary to recoat with Cetol Log and Siding or Cetol 1, 23 Plus. Sikkens Cetol Maintenance RE wood finish should be applied within four weeks of surface cleaning, provided that the surface remains free of dirt, grease, grime, mildew.
Is Sikkens a paint or a stain?
Available in a wide-range of stain colours, and translucent, semi-translucent and solid finishes, there is a Sikkens wood stain and finish to beautify your decks, log walls, wooden siding, doors and window trim.
Can you paint over Sikkens?
To paint over the Sikkens HLS oil stain on your handrail is a fairly simple process... lightly sand timber with 80-120 paper to remove any obvious loose material,apply a coat of turps based primer/undercoat,allow to dry for 24 hours or so then apply your exterior acrylic coating...
Is Sikkens oil or water based?
Sikkens Cetol BLX-Pro is a quick drying water based exterior timber finish that is ideal for decks and outdoor furniture providing good durability and flexibility.
What is Sikkens stain called now?
ProLuxe SRD RE Wood Finish is a one-coat high-quality, translucent finish for use on a variety of properly prepared exterior wood surfaces such as siding, rails, decks and deck furniture.
Is Sikkens stain oil-based?
Sikkens Proluxe Cetol SRD is a one coat, oil-based, transparent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs. Available in a curated palette of eight wood tones.
Do you sand between coats of Sikkens?
Sikkens Cetol Deck Slip Resistant GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.
How long does cetol last?
Interlux states that Cetol should be stored between 41-95°F, out of sunlight or extreme conditions, and with the container closed completely. If Cetol is kept under these conditions, one can expect a typical shelf life of three years.
What is the difference between cetol 1 and cetol 23?
Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Cetol 23 Plus is a premium, translucent topcoat for Cetol 1.
How do you strip cetol?
I use Sikkens Cetol on my exterior teak and it strips very good with paint stripper. I stripped the entire interior of my boat as well. Just tape off areas that might be damaged by drips. I start with a razor held 90 degrees to the surface and finish with a brass brush.
How do you clean cetol Sikkens?
Using a cloth or sponge, apply an oxalic acids based cleaner such as Sikkens Cetol BL® Deck & Wood Cleaner to the mark or stain. Leave for about 15 minutes before washing away with fresh water. If the stain does not come away easily, then it may be necessary to sand and recoat the entire deck.
Can you varnish over cetol?
Cetol does not need varnish. Just apply according to the instructions on the tin. It is a porous coating so varnish on the top will prevent it from doing its job. it does not actually stain the wood, the colour (if any) comes from a pigment in the mix.
Does Sikkens make an interior stain?
Sikkens interior stains gives you low odor, waterborne, transparent finish for interior wood surfaces which enhances the natural beauty of the wood grain while providing a hard wearing and scratch resistant surface.
What is Sikkens SRD?
Sikkens Srd is a translucent exterior satin finish for your deck. Highly rated by many contractors because ease of application and how it strips and spreads. Official Cetol Srd. Sikkens Cetol RE Srd is a one-coat, translucent exterior wood finish created for use on a wide variety of surfaces. Low VOC stain for 13 states ...
What is Sikkens cetol dek?
Sikkens Cetol Dek, SRD, and Log Home stain are all rated very high on most deck stain sites and by any contractor or expert painter. Cetol Srd is a penetrating oil stain that is easy to remove with a mild stripper for the next application. Sikkens Cetol Srd is great for use on cedar or pressure treated decks.
Why is my cetol wood turning dark?
If the water penetrates and the wood turns dark due to the moisture, this is an indication that its time for a new coat of Cetol SRD. If it still repels water, do not apply a maintenance coat. When reapplying Cetol SRD, the surface should be back to bare wood; otherwise the wood may look dark, blotchy, or shiny. 25.
How to remove overspray from paint?
If the overspray is dry, it will be difficult to remove. It will require the use of a paint stripper/remover or it may be carefully scraped off with a razor blade. Careful use of any paint remover is important.
Does Sikkens pretreatment remove graying?
No, Sikkens Log Pre-Treatment will not prevent the wood from graying. It does not contain any pigments so the wood will begin to grey during the six month to one year waiting period. This is not a major concern. The cleaning process we recommend will completely remove this slight surface graying.
How long do you have to wait to apply Thompson's waterproofing?
Follow the directions, You must wait at least 30-45 days (I recommend 6-12 months) before applying another product. The waterproofing nature of Thompson's precludes using a water based product as a stain or paint.
How long does it take for mildew to go away on a Thompson deck?
I suggest you wait at least one full year for the beading of water to stop and even two years is OK. My front deck got the Thompson's two years ago and I will stain it with an oil based stain this year. It requires minimal cleaning....I may just use a garden hose with a firemen's nozzle. The deck gets full sun all morning so mildew is very hard pressed to survive there.
How much does paraffin wax cost?
So the choice is yours: buy a paraffin based product for $50 a gallon or buy a paraffin based product for $15 a gallon. The cheap product will protect from water and mildew/fungus for two years, then it should be reapplied or covered over with an oil based (not water based) product, color of your choosing.
Can you sand a wood railing?
Have you tried sanding the railing? That would remove the layer with the wax on it; it would also not be as harmful as the striper, and the color you like will come back just like new. It is wood so you always have that as an option not like the composites out there.
Is Thompson's oil based transparent good?
The Thompson Transparent has an effective anti-fungal and gives good service up to two years. When you compare to other oil based products costing three times as much, many of them also recommend restaining after two years. BTW, oil based paraffin products do not support fungus.
Do you need to strip Thompson's Water Seal?
There is no need to "strip" or "sand" the Thompson's Oil based TRANSPARENT Water seal Product because the paraffin soaks into the wood and is not on the surface. It has no pigments in it that rest on top of the wood.
Is clear sealer bad?
Clear sealers seem to be terrible and I've had awful luck with strippers too.
