Step 1 Connect the power cable to the RedLINK internet gateway. Step 2 Connect the power adapter to a wall socket. Step 3 Connect an Ethernet cable from the RedLINK internet gateway to an internet-connected home router. Step 4 Enter the WIRELESS SETUP MODE on your thermostat (refer to thermostat instructions). Step 5
How do I connect my RedLink thermostat to TC comfort?
RedLink thermostats require a RedLink Internet Gateway (RIG). Instead of communicating directly to the WIFI router, the thermostat wirelessly pairs to the RIG. After the RIG is connected to your router with an ethernet patch cable the RedLink thermostat will also be available for interactive control via TC Comfort.
How do I connect to RedLink internet gateway?
2.2 Connect gateway to internet and connect to power. 2.2a Connect RedLINK Internet Gateway to router or modem with Ethernet cable (RJ45). 2.2b Connect gateway’s power cord to an electrical outlet that is not controlled by a wall switch.
What thermostats does MyMy total connect comfort work with?
My Total Connect Comfort is a web portal for remote access to a Honeywell Home RedLINK enabled thermostat. What Thermostats does the RedLINK Internet Gateway work with? The RedLINK Internet Gateway allows the user remote access to any RedLINK enabled Honeywell Home Home thermostat such as Prestige, Wireless FocusPRO, and EConnect.
How do I connect my Honeywell thermostat to TC comfort?
This app requires a compatible Honeywell thermostat that communicates using WIFI or Honeywell's RedLink technology. The WIFI thermostats simply to connect to the wireless internet in your home or business and connect to the TC Comfort app. RedLink is a proprietary technology that allows HVAC components to speak to each other wirelessly.
How do I reset my RedLINK wireless thermostat?
When replacing a zone on your RedLINK Internet Gateway you first need to reset the Gateway device by holding down the connect button for 10 seconds and then re-connecting the new RedLINK thermostat.
How many thermostats can be connected to a Honeywell RedLINK Gateway?
Heating, cooling and IAQ equipment wires to the Equipment Interface Module. One Equipment Interface Module per thermostat. A single touch changes the setting on all thermostats in the RedLINK system. Up to sixteen thermostats per remote.
Does Honeywell RedLINK require WIFI?
RedLink thermostats require a RedLink Internet Gateway (RIG). Instead of communicating directly to the WIFI router, the thermostat wirelessly pairs to the RIG. After the RIG is connected to your router with an ethernet patch cable the RedLink thermostat will also be available for interactive control via TC Comfort.
How do I connect my Honeywell sensor to my thermostat?
0:304:13Getting the most from your Honeywell Home T9 Smart Thermostat with ...YouTubeStart of suggested clipEnd of suggested clipNow remove the sensor cover and insert batteries. Then tap next then press the connect button on theMoreNow remove the sensor cover and insert batteries. Then tap next then press the connect button on the sensor. Your unit will then search for the sensor.
How do I add a thermostat to my Honeywell app?
In the location you would like to add a new thermostat, click on the plus symbol.Select the T6/T6R Wireless Thermostat option.Follow the installation instructions within the Honeywell Home app.
Why can't I connect to my Honeywell thermostat?
Try the following: Make sure your app is up to date and your mobile phone is within 3-5 feet of your thermostat. Restart your mobile device and turn off any apps that may enhance the security, including VPN's, GPS spoofers, etc. These can be turned on again once the connection of the thermostat is complete.
How does Honeywell RedLINK work?
1:318:40Honeywell RedLINK™ Wireless Thermostat Training Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe return air sensor features high and low temperature limits to protect the home with wirelessMoreThe return air sensor features high and low temperature limits to protect the home with wireless focus pro there is no longer a need to run wires. We means there's no longer risk in bidding jobs.
What does the RedLINK Internet Gateway do?
Internet gateways connect Wi-Fi-enabled, Honeywell Home RedLink thermostats to the internet, allowing users to remotely monitor and control heating and cooling systems as well as whole-house humidifiers and dehumidifiers from a smart device.
What is RedLINK on Honeywell thermostat?
Honeywell Home RedLINK Technology is the robust platform behind a full suite of wireless thermostats, zoning solutions and accessories. With RedLINK, you can design advanced solutions that solve complex comfort challenges while giving customers complete control.
How do I connect my Honeywell thermostat to WiFi?
Connecting A Honeywell 9000 Series Thermostat To WiFiPress the “Menu” button.Press the “WiFi Setup” button.The thermostat will scan the WiFi networks in the area and display a list of the networks.Touch to select your network from the list.The screen will present you with a field to enter your WiFi password.More items...•
How do I reset my Honeywell thermostat sensor?
Reset the sensor by pressing and holding the Connect button on the sensor until the orange light appears (after about 15 seconds). Then try adding the sensor to the thermostat again.
How do I reset my Honeywell thermostat?
Resetting a Honeywell Thermostat Power off the thermostat and remove the batteries. Put the batteries in the wrong way, with negative to positive and positive to negative. Wait ten seconds and put them back in the correct way. Your thermostat will be reset to factory settings.
What does Honeywell RedLINK do?
Honeywell Home RedLINK Technology is the robust platform behind a full suite of wireless thermostats, zoning solutions and accessories. With RedLINK, you can design advanced solutions that solve complex comfort challenges while giving customers complete control.
How do I connect my Honeywell thermostat to my new router?
2:012:53How to reset the Wi-Fi connection on your Honeywell Home VisionPRO ...YouTubeStart of suggested clipEnd of suggested clip1.1 into the navigation bar and press Enter on this page select your home Wi-Fi network enter yourMore1.1 into the navigation bar and press Enter on this page select your home Wi-Fi network enter your Wi-Fi network password and press connect.
How does a Honeywell wireless thermostat work?
Honeywell wireless thermostats can improve the control over the temperature in a room by sensing the surrounding air temperature and adjusting the heating accordingly, creating an automatic system which naturally conserves energy.
How do I reset my Honeywell EIM?
4:335:25How to Pair the Honeywell VisionPro with an EIM (Equipment Interface ...YouTubeStart of suggested clipEnd of suggested clipHit select reset everything to the factory defaults. It resets.MoreHit select reset everything to the factory defaults. It resets.
When replacing a thermostat, do you reset the Redlink thermostat?
When you replace a thermostat, you must reset the RedLINK accessories before connecting them to the new thermostat. Follow the instructions below:
What wire is required for Redlink thermostat?
NOTE: When the thermostat is NOT used with the Equipment Interface Module or the TrueZONE Wireless Adapter, a C wire is required for RedLINK.
How to add a thermostat to a SD card?
2 Select the item to load or save. 3 Follow the prompts on the screen. • To add information from the card to the thermostat, select Load from SD Card. • To put thermostat information on the card, select Save to SD Card. 4 When you are finished, touch Done, then
How long does a thermostat stay in listening mode?
NOTE: Thermostat displays a count- down timer while in the listening mode. If it detects no activity for 15 minutes, it exits listening mode.
How to install Honeywell thermostat?
1 Visit http://thermostatsetup.honeywell.com to enter your dealer information or load new thermostat software. 2 Connect a microSD USB Adapterto your computer to download the file(s). 3 After the file(s) are downloaded, remove the microSD card from the adapter and insert into thermostat.
Where to find the date code on a thermostat?
You can find the date code mmercial on the back of the thermostat, or 1 , MN 55422Touch Menu. 2 Select Dealer Information. 3 Scroll down to see the Date Code.
Does the thermostat relay work with the equipment interface module?
NOTE: The relay outputs and inputs on the thermostat do not function when used with an Equipment Interface Module or TrueZONE Wireless Adapter.
