How to Install a DRIcore Subfloor in your Basement
- Sweep or vacuum floor to ensure a smooth surface.
- Install 1/4" temporary spacers along wall edges.
- Check your starting corner for squareness.
- Use a tapping block and hammer to ensure a snug fit.
- Rows #1 and #3 look the same.
- ... (more items)
What is dricore subfloor?
Once that was all done, the fun part started! DRIcore Subfloor is an easy-to-install subfloor system designed for basements. The panels are equipped with air gap technology to protect, insulate, and cushion finished floors. They have OSB top and polyethylene bottom.
What is the weight of a panel of dricore subfloor?
DRIcore Subfloor allows concrete to breathe, which reduces the potential for mold and mildew. Each panel is 2 foot x 2 foot and weighs 7.5lbs. Want more info?
Can you put a stud wall on top of a subfloor?
An interior stud wall can be set right on top of your new DRICORE® subfloor and is in fact, the preferred method of installation. Install your 2X4 frame directly on top of the subfloor, measuring for a "snug" fit between the subfloor and ceiling.
How many dricore shims do I need for a subfloor?
DRICORE® Subfloor - 3/4" x 23.25" x 23.25" DRICORE® Subfloor R+ - 1” x 23.25” x 23.25” Once you have determined the number of panels required, we recommend purchasing 1 package of leveling shims (24 shims/package) for every 60 panels.
Do you need to screw down DRIcore subfloor?
DRIcore panels are easy to install. Press-fit panels together through a secure tongue-and-groove design. No fastening or gluing is required. Panels stay together by staggering seams to interlock creating a 'puzzle' effect.
How do you install DRIcore flooring?
1:403:43How-To Install DRIcore Subfloor - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get started you install a quarter inch spacer on the starting two walls if. Possible. Use a fullMoreTo get started you install a quarter inch spacer on the starting two walls if. Possible. Use a full panel. To begin with the tongue. Going. Towards the wall. It.
Do you need underlayment with DRIcore?
A 1/4" plywood underlayment approved for use with sheet vinyl or adhesive-backed vinyl tiles should be fastened to the DRICORE® panels. We do not recommend lauan plywood as an underlayment. Use 5/8 flooring fasteners that do not penetrate the moisture barrier on the underside of the DRICORE® panels.
Do you frame on top of DRIcore?
DRIcore® panels can be installed where there is an existing wall frame or a concrete foundation wall. Where only a concrete foundation exists, it is best to install wall framing directly on top of DRIcore® panels to elevate the floor and wall framing away from direct contact of potentially damp concrete.
How do you install Dricore on a basement floor?
3:065:22How to Install DRICORE Subfloor with Bryan Baeumler & Danielle Bryk 🛠️YouTubeStart of suggested clipEnd of suggested clipYour third row should look like your first full size to start forming a natural offset row fourMoreYour third row should look like your first full size to start forming a natural offset row four should be staggered like row two and so on the first three rows are the ball game for subfloor. Success.
How do you attach subfloor to concrete?
1:158:22HOW TO INSTALL A SUBFLOOR ON CONCRETE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all you have to do is let up your joints do not overlap them and then you just place the tuckMoreSo all you have to do is let up your joints do not overlap them and then you just place the tuck tape over. Top. Try to keep them nice and.
What is the best material to put on a basement floor?
vinylThe best type of flooring for basements is vinyl. Vinyl flooring can come in the form of vinyl plank and vinyl tile, giving it the ability to look nearly identical to hardwood and stone products with the added benefit of being waterproof. Vinyl flooring is made of PVC making it durable and waterproof.
How long does it take to install DriCore?
HOW LONG DOES IT TAKE TO INSTALL DRICORE® SUBFLOOR PANELS? The length of installation time will vary by the room size and complexity of room layout. An average 400 square foot basement should take 4 hours.
Is DriCore a vapor barrier?
In fact DriCore prohibits adding a second vapor barrier. DriCore R is rated at . 79 perms, far below the .
Do walls go on top of subfloor?
1 Answer. Show activity on this post. Utterly standard - the subfloor goes on, then the walls go up. Doing it any other way is rather fraught with difficulties to no benefit.
Do you install subfloor before framing?
If you use a product like DriCore for the subfloor, they even explicitly recommend you frame on top of their subfloor product. They do, however, recommend you screw the framing through the subfloor into the concrete with something like 3" Tapcons spaced every 4 ft through the bottom sill of the framing.
Do you install subfloor before drywall?
In standard home construction, the contractor installs the subfloor before installing the drywall. In fact, the subfloor is one of the first features of construction, whereas drywall installation takes place toward the end of the project.
How many Dricore panels do I need?
Estimating is easy. The total square footage of your room divided by 3.3 equals the number of panels you need. This factor includes an allowance for normal wastage and cutting around obstacles and pipes. To calculate how many panels you need.
How do you level Dricore?
6:088:39DRIcore Subfloor Installation Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut the last panel of each row to fit in place allowing. For the quarter inch gap. Check eachMoreCut the last panel of each row to fit in place allowing. For the quarter inch gap. Check each completed role for leveling.
How do you install bathroom Dricore?
0:585:49DRICORE Subfloor Installation Disaster DIY with Bryan BaeumlerYouTubeStart of suggested clipEnd of suggested clipAll right Scott so here's a subfloor product we're gonna use it's called dry coil it's got a plasticMoreAll right Scott so here's a subfloor product we're gonna use it's called dry coil it's got a plastic on the bottom with some feet so when this is down on your concrete.
How do you install a floating subfloor?
To install a floated subfloor system, first place a layer of plywood subfloor panels with the edges parallel to the wall. Use a ¾” spacer between the plywood and the wall and a 1/8” spacer between panels. Next, lay a second layer of plywood at a 45-degree angle to the first layer.
How much weight can a DRICORE subfloor hold?
Strong enough to support gym equipment, and large furniture, DRICORE ® Subfloors are rated to support up to 6,642 lbs. per sq. ft.
What is DRICORE ®?
DRICORE ® has been designed with Air Gap Technology that encourages air flow to help protect against moisture emitted from concrete floors, as well as small water leaks.
Is concrete floor hard?
Concrete floors are hard and unforgiving on your body over time. DRICORE ® Subfloors help soften finished floors for a greater level of comfort.
DRIcore Subfloor Install
First up, we measured our room and did a bit of math. Our room is 11 feet wide by 20 feet long. To calculate our total square footage we multiplied 11×22 to get 220 square feet.
Written by Kristen
Kristen & her husband El Granto & their Vizsla Odin live in a converted Storefront in downtown Toronto.