Place the fuel filter and tubing in the fuel tank and connect to the other end to the carburetor A carburetor or carburettor is a device that mixes air and fuel for internal combustion engines in the proper air–fuel ratio for combustion. It is sometimes colloquially shortened to carb in the UK and North America or carby in Australia. To carburate or carburet means to mix the air and fu…Carburetor
Can you replace fuel lines on a Poulan chainsaw?
The replacement of fuel lines is an inexpensive and easy process to replace. You can replace your fuel lines with the help of this guidance quickly. We have discussed the entire process of how to replace fuel lines on a Poulan chainsaw.
How do you fill the fuel hose on a chainsaw?
Assemble the chain saw starter housing, air filter housing and cylinder cover in reverse order of disassembly. Fill the fuel tank with fresh fuel. Start and stop the chain saw several times to check for proper fuel hose operation.
How do you replace the fuel line on a carburetor?
Replace the old tubing with the new tubing by attaching it to the primer bulb and inserting it into the fuel tank. Loosen the screws that hold the carburetor in place to remove it so you can access the fuel line that runs under it and extends into the fuel tank. Remove the fuel line.
How do I mix the fuel to oil ratio for Poulan?
To get the required 40:1 fuel to oil ratio, mix 3.2 ounces of Poulan 2-cycle air-cooled engine oil with one gallon of pure unleaded gasoline. Oil will separate from gasoline over a length of time. We recommend vigorously shaking your oil and gas mixture before recharging your unit to ensure correct oil and gas mixing.
Where do the fuel lines go on a chainsaw?
4:146:36Poulan & Craftsman Chainsaw fuel lines - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne of them goes from the carburetor. To the primer bulb. And be this top one and then the other oneMoreOne of them goes from the carburetor. To the primer bulb. And be this top one and then the other one goes from the prior bulb.
Where does the fuel line connect to the carb?
6:448:29Carburetor fuel lines for dummies - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the filter is connected. This line and this one just goes down into the tank.MoreSo the filter is connected. This line and this one just goes down into the tank.
How do you replace the fuel line on a Poulan Pro chainsaw?
4:1113:03Poulan chainsaw fuel line replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the top of the gas tank. Now what i usually do is take pb blaster wd-40 or some kind of oil toMoreOn the top of the gas tank. Now what i usually do is take pb blaster wd-40 or some kind of oil to lubricate the fuel line that way it'll slide down into the top of the fuel tank.
Why is my Poulan chainsaw not getting gas?
0:297:30Poulan Chainsaw Repair - How to Replace the Fuel Return LineYouTubeStart of suggested clipEnd of suggested clipCover. Now remove the air filter. Cover just simply sits over the top of the air filter base.MoreCover. Now remove the air filter. Cover just simply sits over the top of the air filter base.
Which fuel line is the return line?
The vapor-return line normally runs from the fuel pump or the fuel filter to the fuel tank. This vapor-return line is connected to a special outlet in the fuel pump. Any vapor that forms in the fuel pump returns to the fuel tank through this line.
How do you hook up a carburetor line?
10:0115:25Swapping carburetor, fuel lines and filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I did with the other one take a wrench and grab the one side hook. Take another wrench. AndMoreSo what I did with the other one take a wrench and grab the one side hook. Take another wrench. And then turn and pinch down what you're doing is making this hole smaller.
What size is Poulan chainsaw fuel line?
Poulan Pro Fuel Line Kit No. Comes with a large 3/16" OD by 3/32" ID 2 feet long, small 9/64" OD by 5/64" ID 2 feet long. Also comes with the fuel line fitting connector.
How do I put fuel lines in my tank?
2:354:35How to Replace the Fuel Line in a Line Trimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tankMoreOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tank. And grab the fuel line then pull the line through the fuel tank filler opening.
How many fuel lines does a chainsaw have?
Most chainsaws have two fuel lines – one that feeds fuel into the carburetor and a return tube that allows unused fuel to flow back into the chainsaw gas tank. The return tube may be slightly larger in diameter than the tubing that feeds the fuel, or both tubes may be the same size.
Why does my chainsaw dies when I give it gas?
If the filter becomes clogged, not enough fuel will reach the engine for it to run properly. Because your chainsaw will idle, but dies when it is revved up to full power, it means that the filter is only partially clogged; it will allow enough fuel to the engine to run on idle, but not enough to sustain full throttle.
What would cause a chainsaw not to start?
A spark plug might be defective and needs to be replaced. If your chainsaw has a defective spark plug, it cannot create an electrical current to ignite the system. Remove the spark plug and inspect if it is dirty, cracked, eroded, or damaged. There may also be a heavy carbon buildup or a burned-up electrode.
How do you prime a chainsaw?
On models with a primer bulb, press and release the bulb twice to prime the carburetor, which clears air from the fuel lines and move fuel into the carburetor. Try to start the chainsaw after priming the carburetor.
How to remove fuel line from carburetor?
Loosen the screws that hold the carburetor in place to remove it so you can access the fuel line that runs under it and extends into the fuel tank. Remove the fuel line. Pop the fuel filter off and attach the new filter to the end of the tubing.
How to prevent accidental ignition of chainsaw?
Remove the spark plug wire from the spark plug to prevent accidental ignition of the chainsaw during the fuel line replacement. Empty the fuel from the gas tank into a gas can, and store it away from where you're working for replacement after the repair.
Can you replace gas lines on Poulan chainsaw?
Even if you're not particularly handy when it comes to repairs, replacing cracked or damaged gas lines on ...
How to change fuel line on Poulan Farmhand chainsaw?
How to change the fuel line in Poulan farmhand chainsaw? When you have completed this step, you will want to add the carburetor. Again, you can connect this by hand or by attaching it to the chain with the help of carburetor clips. When you have added the carburetor to make sure to attach the fuel line to the carburetor securely.
What happens if you don't add fuel to a Poulan chainsaw?
If you don’t do this, the fuel filter can get backed up with the carburetor and clog the fuel line. Where does the little check valve go on a Poulan chainsaw fuel line?
How to tell if a Poulan chainsaw has a carburetor?
If you have an older Poulan chainsaw, it is likely that the carburetor is fed through a different fuel line than the electrical one. This is easily identified on older Poulan chainsaw models by looking at the two small holes near the rear of the carburetor.
What is Poulan chainsaw?
In order to properly use this Poulan chainsaw fuel line diagram, you should first know what a Poulan weed eater is. A Poulan we ed eater is a machine that separates waste gas from fuel during the process of cutting firewood. The chain is also known as a Poulan chain and is used to transfer the fuel to a special mixing chamber where it can be warmed ...
How does Poulan chain work?
The chain is also known as a Poulan chain and is used to transfer the fuel to a special mixing chamber where it can be warmed up. Once heated, it is then passed through a small pipe called a siphon tube, which is connected to a large fuel tank. This Poulan chainsaw fuel line diagram shows how this machine works.
What is Poulan Pro fuel line?
But what do they mean by Poulan pro chainsaw fuel line diagram? Basically, it refers to a Poulan chainsaw fuel line, which is crucial in ensuring that you get your machines working at top-notch.
How to add fuel to chainsaw?
The first step is to add the fuel filter to your chainsaw. You can connect this to the chain, or it can be removed and connected by hand . It is important to note that in some models you will need to remove the spark plug before adding this. Next, connect the electric igniter to the chain and slowly but carefully add the fuel to the spark plug.
These are Some Steps to Replace Fuel Lines
Separate the spark wire from the spark plug that blocks accidental ignition of the chainsaw during the fuel line change. Now you can empty the fuel from the gas tank into gas and secure it away from where you are working for replacement after repair.
The Unassembling
First, drain the fuel from the saw. Remove the top cover. Remove the air filter cover, the air filter, and the air filter base. You need to remove the throttle linkage. The trigger needs to be pulled away from the trigger. Then comes the turn of the carburetor, then the two fuel lines go into the carburetor.
Replacing with new fuel lines
After getting the fuel cap off, use hemostats to pull that fitting and fuel line from the tank. Remove the fuel line from the fitting inside the tank. Now it is time to cut a new fuel line. The old piece of the line might be used as a guide. Add a bit of extra line to make up for the line cut off before.
Reinstall the fuel
Reinstall the fuel lines onto the carburetor, namely, the incoming line to the bottom of the carb and the line to the primer bulb. We need to install the remaining things we had removed at the onset. Install the carburetor back, then the throttle linkage.
Conclusion
Over with passing the time, fuel lines will fail or collapse and remove the flow of gasoline to the engine. The tube may cause crack and leak gas that causes life hazards. So the replacement of fuel lines on time will save your life and money also.
