Connect the dryer to the wall pipe. Once you’ve hooked the pipe connector to the pipe on the dryer, connect the other end to the gas pipe in your wall. The gas pipe should have a threaded valve component attached to it. You will be attaching your pipe connector to the valve component.
How do you install and hookup a gas dryer?
Your Independent Installer Will:
- Connect your new appliance to existing electrical/gas
- Test the new appliance to ensure proper operation
- Haul away the old appliance*
- Obtain necessary permits in most areas**
Where does the gas hook up to my dryer?
Part 2 Part 2 of 4: Connecting the Gas Supply
- Turn off the breakers and gas valve. The breakers can be turned off at the main breaker panel. ...
- Put thread compound on the threaded pipe ends. Before connecting the piping on your dryer to the gas pipe in your wall, you will need to coat all threaded ...
- Attach a pipe connector. ...
- Connect the dryer to the wall pipe. ...
- Tighten all the connections. ...
How to safely install a gas dryer?
gas dryer install: 1. Shut off gas at shutoff valve nearest dryer. (Off= handle perpendicular to gas line). Pull out dryer so gas line fitting is accessible. 2. The gas line will be a corrugated metal hose or copper tubing. Remove fitting at dryer. There may be a slight gas smell from residual gas in the tubing.
Are my hookups for a gas or electric dryer?
If you have an existing dryer you can figure out whether it is electrical or gas by checking the model number. A gas dryer will usually have a ‘G’ within the series of letters, electrical dryers will have an ‘E’. You can also check the back and look for a gas line hook up.
Can I hook up a gas dryer myself?
Not only is self-installation a cheaper option, but it's also pretty simple to do, even for the non-DIY'ers. While the installation instructions for electric and gas dryers are a little different, both of them can be done with a few tools, a bit of patience and some great directions.
Do you have to hook up water to Samsung dryer?
A: Connection to water is totally optional.
How do you connect the hose to a Samsung dryer?
4:268:05How to install a STEAM DRYER HOSE KIT. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the hose has got two different ends to it it's got a regular you know hose end and it's got a 90MoreSo the hose has got two different ends to it it's got a regular you know hose end and it's got a 90 degree bend. So the 90 degree bend is going to be going directly to your dryer for the steam.
What does a gas dryer hookup look like?
0:111:29Is My Dryer Gas Or Electric? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is very different than a standard 120 volt plug it's noticeably larger. And it will have eitherMoreThis is very different than a standard 120 volt plug it's noticeably larger. And it will have either three or four prongs you have a gas dryer it'll still be plugged into an electric outlet.
Does gas dryer need water line?
Yes you need a water line to the dryer. When it's installed, all you need is a t-type water spigot off the cold water supply. The men that installed it did that and it works fine.
Why does gas dryer need cold water?
A: Helps eliminate wrinkles uses cold water line to steam dry. It's an added function that you can use near the end of your normal dry function. You do not need to use the steam function or have the cold water line hooked up, as long as you don't want to use the steam function.
Why does my Samsung dryer have a water hook up?
They can jet water into the dryer cycle to steam clothes, helping to reduce wrinkles. This type of dryer must be attached to the cold-water faucet in the laundry room.
Do you have to connect water hose to dryer?
Hoses and Tubing Establishing the water connection requires hoses to be connected to a water source near the dryer. Additional hosing is needed to connect the water source to the dryer's intake. The dryer also needs a vent tube and connecting clamps to exhaust the dryer's air to the outside of the laundry room.
How do you hook up water to a dryer?
0:332:10How to Install Your Whirlpool Steam Dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlso connect the hose that's running from your washing machine to the Y connector. Now connect yourMoreAlso connect the hose that's running from your washing machine to the Y connector. Now connect your third and final inlet hose this will run from the Y connector to the dryer.
Does a gas dryer need a special vent?
Gas dryers must always be vented. When gas dryers are running, the combustion that takes place inside produces carbon monoxide, which must be vented either outdoors or into a suitable HVAC ventilation system. Most electric dryers also require venting to keep from blowing hot, moist air into the home.
Do gas dryers need electricity?
Both gas and electric clothes dryers require electricity to run, but gas dryers also require a gas hookup to generate heat. Gas dryers use natural gas or propane to generate heat and electricity to power the drum, fan, lights and controls. Electric dryers are completely powered by electricity.
Do gas dryers have a pilot light?
You have to manually light the pilot lights in gas dryers. The last such dryer was manufactured in 1994. Gas dryers have electronic ignition mechanisms that light the burner when the controls call for heat.
How does a steam dryer work?
Steam dryers have an additional installation step. They can jet water into the dryer cycle to steam clothes, helping to reduce wrinkles. This type of dryer must be attached to the cold-water faucet in the laundry room.
How clear should a dryer be?
Your dryer must have two inches clear in front of it, even when the laundry closet door is closed. It must have an inch clear on either side and five inches clear in the back.
Does Samsung have a dryer?
Samsung offers a number of different dryers, from basic models that dry clothes using simple heat to more advance models with a steam-drying feature. No matter which dryer you purchase, the basics of installation remain the same. However, depending on the specific model you purchase for your home, there may be some additional steps to install ...
How far away from the dryer should you put a gas line?
The gas line should have a supply valve in the same room where you intend to install the dryer, preferably within 6 feet (1.8 m) of the unit. If there is no gas pipe in the laundry room, you will have to have one installed by a qualified technician.
How to check for gas leaks in dryer?
Check for gas leaks with a dish soap solution. Make a solution of one part water and one part mild dish detergent. Spread a thin coating on the connectors between the various gas pipe components. Then, switch on the gas at the dryer supply valve.
What kind of hose do I need for a dryer vent?
If you need to attach your dryer to a vent above floor level, you may need a semi-rigid vent hose. Or, if you use a rigid vent hose, you can attach a pair of elbow-shaped bends to the top (where the hose connects to the wall) and the bottom (where the hose connects to the dryer).
How big is a dryer vent?
The vent on your dryer needs to match up with the one in the wall in your laundry room. Most exhaust vents are 4 inches (10.16 cm) in diameter. If the vent in your dryer does not match the one on your wall, you should be able to purchase a vent adapter or transition pipe at a hardware or home supply store.
How to keep a dryer from getting damaged?
If your dryer does not come with a cord, buy a power cord which is suitable for the dryer you have purchased. You will also need a strain relief to keep the cord from becoming damaged. The appropriate cord and strain relief type should be listed in the manufacturer's manual.
How many volts does a gas dryer use?
Check the voltage on the dryer. Most new gas dryers use 120 volts of electricity. Make sure your home supports this. Some older homes only offer 110 volt service, while most modern homes are equipped to support 240 volt service. Check your circuit breaker to make sure you have two columns of 120 volt circuits.
How to turn off gas valve?
In many homes, the gas valve can be turned off by using a 12 to 15 inch (30.5 to 38.1 cm) adjustable wrench. Turn the valve until the tang (handle you attach the wrench to) is perpendicular to the pipe. If you are unsure of how to turn off the gas valve, contact your gas supplier.
Video clip: Introduction to the Samsung dryer LP conversion and where to begin
Video clip: Introduction to the Samsung dryer LP conversion and where to begin.
How To Remove The Top And Front Panels On The Samsung Dryer
To begin open the front door and grasp the front edge of the top panel. Firmly pull up on the top panel and it will pop free. Lift the lid and prop it up with a block of wood.
Front Panel Removed
Once the front cover is removed you can see the gas valve located at the lower right corner. To access the orifice and air shutter the gas tube assembly will need to be removed. A 10mm socket works well to remove the screw that holds the gas tube in place. With the screw removed the gas tube will slide off the orifice on the end closes to you.
Gas Tube Removed
After the gas tube has been removed you will be able to clearly see the air shutter adjustment that will need to be made. Loosen the set screw and rotate the shutter clockwise so the “LP” is nearer to the set screw. Then retighten the set screw. This allows more air to mix with the propane for proper combustion.
Closing Comments
This job took less than an hour and that included documenting my steps, so I could share it with you. Jobs like these can help build your confidence and make future DIY projects easier. One example is converting a natural gas range over to LP. I’ve done this a couple times and the steps are very similar.
