how do you read a pgampe meter

How to Read a Gas Meter

• Method 1 Using an Analog Dial Meter. Recognize that each dial represents a number in a 4- to 5- digit reading. Your...
• Method 2 Checking a Digital Meter. Make sure the meter is for your gas usage. Gas meters are more likely to be analog...
• Method 3 Calculating Your Usage. Check your gas meter at the same time each month. This is the only way to...

Full Answer

How do you read an electric meter?

When reading an electric meter, read and write down the numbers as shown on the dials from right to left. When the pointer is directly on a number, look at the dial to the right.

How do you read the pointer on a dial meter?

If the pointer is between 9 and 0, always read 9. If the pointer appears to be exactly on a number, read the next lowest number unless the pointer to its right has passed zero. Since the first dial has no dial to its right, the number must be read independently. If your meter is a smart meter or has digital numbers, use those as your reading.

How do I fill in my water meter readings?

Fill in your meter readings "). Use the number indicated by the sweep arm as the final digit. Wait 20 minutes then read your water meter again and record the numbers. Subtract the first water meter reading from the second.

How do you read an analog gas meter?

To read an analog gas meter, start by looking at the dial on the far left and recording the number that the needle is pointing to. If the needle is between two numbers, choose the smaller number, even if the needle is closer to the larger number.

How do I read my digital electric meter?

0:071:07How To: Read Your Smart Meter - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf. You see two small lines moving from left to right you will know that you are drawing power fromMoreIf. You see two small lines moving from left to right you will know that you are drawing power from the grid. The second number shows how many kilowatts you are pushing on to PGA's grid.

What do the numbers on my power meter mean?

kilowatt-hoursThe pointers advance when electricity flows through the meter, so the dials indicate the total number of kilowatt-hours (KWH) you have used. To determine your correct meter reading, simply read the dials in order from right to left. As you read each dial, write down the number.

How often does PG&E read meters?

monthlyPG&E meter readers make every effort to read your meters monthly. You may want to know when we're coming so that you can plan accordingly. Sometimes, you must provide our meter readers access to your system.

How do you read a smart meter?

To read the meter:press 9.wait until you see the letters 'IMP KWH'you'll then see numbers followed by 'KWH' - this is your reading.write down the numbers from left to right.ignore any zeroes at the beginning and any numbers after the decimal point.

How does a PGE smart meter work?

Each SmartMeter™ electric meter is equipped with a network radio. The radio transmits your hourly meter readings, periodically, to an electric network access point. This data is then transmitted to PG&E through a dedicated radio frequency network.

Can I read my power meter?

0:091:42How to Read Your Electric Meter - YouTubeYouTubeStart of suggested clipEnd of suggested clipWrite down the numbers from right to left. The result you obtain is the meter reading subtract. YourMoreWrite down the numbers from right to left. The result you obtain is the meter reading subtract. Your numbers from your previous. Read from your current read to determine your usage.

How does PSEG read my gas meter?

0:171:16A Guide to Your Bill: Meter Reader - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou use one of our meter readers will come to your home and read your meter every other month that'sMoreYou use one of our meter readers will come to your home and read your meter every other month that's how we get all your energy usage. Information that appears on your bill.

Why are the numbers on my electric meter flashing?

Occasionally, the electric meter may be mounted on a 'stand' closer to the street. Once you find the electric meter, you will notice a small LCD screen which flashes various numbers and letters during normal operation. It will 'cycle' through this flashing routine in about 10-15 seconds. Keep your eyes on the meter.

Why is my electric meter flashing 88888?

Many of the displays on our meters appear to "flash" from the reading to a display of 88888. This is normal and insures the reading on your display is accurate.

How do you read a kilowatt hour meter?

0:465:25Reading a Digital Electric Meter & Calculate Usage and Cost - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirectly after the flashing of the eights you get a readout in kilowatt hours. Now. This is a set ofMoreDirectly after the flashing of the eights you get a readout in kilowatt hours. Now. This is a set of data from a series of three readings from the electric. Meter. So if this was on our first reading.

How to read gas meter?

When reading a gas meter, read and write down the numbers as shown on the dials from left to right (opposite of an electric meter). It is important to note that on both types of meters, the hands of adjacent dials turn in opposite directions to each other.

How to read an electric meter?

When reading an electric meter, read and write down the numbers as shown on the dials from right to left. When the pointer is directly on a number, look at the dial to the right. If it has passed zero, use the next higher number. If it has not passed zero, use the lower number.

How does a gas meter work?

A gas meter is driven by the force of the moving gas in the pipe, and also turns faster as the flow increases. Each time the dial with the lower value makes one complete revolution, the pointer on the next higher value dial moves ahead one digit. When reading a gas meter, read and write down the numbers as shown on the dials from left to right ...

How is natural gas measured?

Natural gas is commonly measured by the cubic foot, and you are billed by the thousands of cubic feet (MCF) or hundreds of cubic feet (CCF). You may also be billed by the therm, which is about the same as a CCF or 100 cubic feet. To measure the amount of electricity or gas that you use, the utility installs a meter between ...

How does an electric meter work?

The standard electric power meter is a clock-like device driven by the electricity moving through it. As the home draws current from the power lines , a set of small gears inside the meter move. The number of revolutions is recorded by the dials that you can see on the face of the meter.

What is the unit of measure of electricity?

Electric Meters. The basic unit of measure of electric power is the watt. One thousand watts are called a kilowatt. If you use one thousand watts of power in one hour you have used a kilowatt-hour (kWh). Your electric utility bills you by the kWh.

What is the difference between a month's reading and the next?

The difference between one month's reading and the next is the amount of energy units that have been used for that billing period.

How many gallons per hour at 80 PSI?

In this case, the curve shows that the pump can achieve a flow rate of 1321 gallons per hour at 80 PSI of discharge pressure.

What is the head of a pump?

Head is the height to which a pump can raise water straight up. Water creates pressure or resistance, at predictable rates, so we can calculate head as the differential pressure that a pump has to overcome in order to raise the water. Common units are feet of head and pounds per square inch.

What is pump performance curve?

A pump performance curve helps you select the right pump for the specific needs of your application.

How to read an electric meter?

What is the reading of the example electric meter shown below? 1 The pointer on the far left dial has passed 8, and is between 8 and 9. Read the smaller number which the pointer just passed, which is 8. 2 The pointer on the next dial looks like it is right on the 4. But, the dial to its right has not passed zero. So, you would read this dial as 3. 3 The next dial has passed 8, and is between 8 and 9. Again, read the smaller number which the pointer has just passed, which is 8. 4 The second pointer from the right has just passed 9, and is between 9 and 0. Read this as 9. 5 The pointer on the far right is directly on number 5. Read this as 5.

How many dials does a meter have?

Some meters have four dials, some have five dials and some may even have six dials on the face of a meter. Each dial has 10 numbers and a pointer. Every other dial is numbered counterclockwise. The hands follow the direction of the numbers and advance only when you are using electricity.

When to read the next lowest number?

If the pointer appears to be exactly on a number, read the next lowest number unless the pointer to its right has passed zero. Since the first dial has no dial to its right, the number must be read independently.

Where is the pointer on the far right?

The pointer on the far right is directly on number 5. Read this as 5.

Is each meter numbered?

Each meter is numbered. Make note of your meter number.

Can a smart meter read a number?

Since the first dial has no dial to its right, the number must be read independently. If your meter is a smart meter or has digital numbers, use those as your reading. Each meter is numbered. Make note of your meter number.

EDMI ES-10A, ES-10B, or ES-12B SMETS2 Electricity Meter (4 Terminal or 5 Terminal)

The screen on your meter switches between 3 displays. To see your meter reading, please use the 'IMPRT' screen.

Secure Liberty 100 SMETS1 Electricity Meter

The following screen will display the Import register reading, this will time out after 4 seconds. Please use this when submitting your meter reading

Elster AS300P SMETS1 Electricity Meter

Press and hold the middle button to enter the ‘Total Registers’ sub-menu, and ‘Cum. Imp.’ Will be displayed, with a value underneath it. Please use this when submitting your meter reading

How to find out how your water meter is read?

To find out how your meter is read, and therefore how your bill is structured, contact your local provider. Once you have an understanding of how the billing system works, you can begin keeping track of your monthly consumption yourself. Water usage is most commonly measured in either cubic feet or gallons.

How many digits are on a water meter?

There are nine digits around the face of an analog display, depending on the meter each number represents one cubic foot or one gallon of water. For every cubic foot or gallon that runs through your home, the long sweep hand will move from one number to the next.

How to check water usage?

If you receive a monthly water bill at your residence, then your water usage is monitored by a water meter. Water meters feature numerical readouts that make it easy for you or your area utilities board to keep track of the amount of water running to your home on a daily basis. Whether your property is equipped with a standard analog dial or a newer digital display, calculating your water usage is simple. Just look at the number on the display, then subtract that number from the previous month’s to determine how much water you can expect to be billed for. However, keep in mind that some municipalities use a device that sends a signal using radio frequencies, so you would not be able to read the meter in these cases.

How to keep water meter from getting damaged?

Replace the meter cap. Don't forget to fit the protective cap back over the dial before you close up the water meter box. This will help prevent possible damage and keep it clean so it can be easily read in the future.

How to know how much water is running through your house?

1. Take monthly readings. To be able to accurately gauge how much water is running through your home, you'll need to check your water meter every thirty days. That way, you'll have something to compare the previous month's report to.

How to open a meter box?

Remove the cover of the meter box. Insert a screwdriver or similar tool into one of the small holes in the cover and pry it up carefully. Set the cover aside somewhere nearby. If your meter box has a hinged cover, simply pull back the lid. Never attempt to open your meter box by hand.

What is a 400 amp instrument meter?

A 400 amp instrument meter would most likely read the power consumption and not the flow of water. Those types of meters are called flow meters.

How to read a digital meter?

Look for the digital screen that displays the reading. Digital meters are super easy to use because they give you an exact reading. All you have to do is look at the screen! The reading should be a 4- or 5-digit number, but you may see a few 0s in front of it. Just disregard the 0s.

Where is the gas meter located?

Your gas meter is mounted outside your home near your gas pipes. It reads how much natural gas your household uses. Knowing how to read your gas meter helps you understand how much gas you’re using and allows you to make sure the gas company is charging you for the right amount of gas. Your meter may be an analog dial meter or an electric meter, both of which are easy to read once you know how they work.

How many dials are there in a meter?

Recognize that each dial represents a number in a 4- to 5- digit reading. Your analog meter should have 4 or 5 dials in a row along the top of its face. Together, they produce a 4- or 5- digit reading. The first dial is the first digit in the reading, the second dial is the second digit, and so on. [1]

How many decimal points are in a metric meter?

If you have a metrical meter, you should see m3 for cubic meters. The meter will likely have 5 digits, as well as 3 decimal points.

What is the unit of measurement for a meter?

Determine if the reading is in imperial or metrical units. If you live in the United States, your meter will likely be in imperial units, such as cubic feet. If you live in an area that uses the metric system, however, you’ll likely see metric units, such as cubic meters.

How to find out how much gas you use?

Subtract last month’s reading from this month’s to get your usage. When in doubt, subtract the biggest number from the smallest number. Use a calculator or subtract it by hand. This will tell you how much gas you used this month!

How often does a gas company check your meter?

Your gas company will take 1 reading a month, usually around the same time. To estimate your usage, you need to do the same thing. Look at your gas bill to see what day the gas company usually checks your meter, though it can vary month-to-month. Checking it on the same day will give you the most accurate reading.

What is a water meter?

A water meter is a device that measures the volume of water delivered to a property. Some water meters measure water in gallons while others measure in cubic feet.

What does a digital water meter do?

The meter read equals the gallons (or cubic feet) used while the flow rate equals the number of gallons (or cubic feet) per minute flowing through the water meter. Some digital meters allow review of historical water use. This feature helps track water use trends such as when leaks have occurred. Check your water provider's website for more information.

How many gallons of water is in a water meter?

The large sweep hand on the dial measures water use in gallons or cubic feet. One gallon or one cubic foot of water passes through the water meter as the sweep hand moves from one number to the next (e.g., 0 to 1). A complete rotation equals 10 gallons or 10 cubic feet depending on the unit measured. Most analog dials have a low-flow indicator that turns as water moves through the water meter. This typically looks like a small triangle (shown), star or gear.

How to tell if a water leak is slow?

To determine if you have a slow leak: Read your water meter and record the numbers in the boxes we've provided (". Fill in your meter readings. Fill in your meter readings "). Use the number indicated by the sweep arm as the final digit. Wait 20 minutes then read your water meter again and record the numbers.

What is the read on a sweep hand?

Analog Example: The sweep hand is on the "1" so the read is 1,356,411 gallons. The last number on the right is a static zero (does not change). When the sweep hand is on the "3" the read will be 1,356,413 gallons. When you record your reading in the Leak Detection Test, make sure to use the number indicated by the sweep arm as the final digit.

How to remove water meter lid?

Use a long screwdriver to remove the lid. However, be cautious as insects, reptiles or other small animals occasionally take residence inside the boxes. Some water meters will have a small, hinged cover while others may not. Lift the cover and use a damp rag to wipe the face clean.

Do water meters lock?

Some water providers lock the lids of residential water meter boxes. If this is the case , you may need to contact your provider or start with the visual inspections in Sections 2 and 3.

What happens to the dial on a water meter?

Dial: the dial will rotate when water passes through the meter. One full

How to replace a meter lid?

in the hole and one to pry up the outer edge. Lift the lid just enough to slide it over to the side. Replace the lid by sliding it back into place. Be careful not to drop the lid on the meter!

How to calculate water use in gallons?

If your meter says CF or Cubic feet on the dial, multiply the water use by 7.48. This is your water use in gallons during the period.

Can a water meter be altered?

The first number reading right to left is fixed and is always zero. Like a car odometer, the water meter odometer cannot be altered.