Detaching Stubborn Seats
- 1 Lubricate corroded metal hardware with a penetrating oil. Penetrating oil, like WD40, is intended to revitalize metal parts that have rusted. ...
- 2 Secure the seat with tape. ...
- 3 Remove the bolts with a socket set. ...
- 4 Cut through unmoving hardware with a hacksaw. ...
- 5 Drill through resistant bolts as a last resort. ...
- 6 Use caution when loosening the nuts with a propane torch. ...
What does it mean when a toilet is broken?
How to flip toilet seat backwards?
What wrench to use to grip a nut?
How long does it take to remove a toilet seat?
Where is the nozzle tip of a can?
Can a slipped wrench crack a toilet?
See 3 more
About this website
How do I stop my toilet seat hinges from corroding?
Metal screws on a toilet seat can often rust, causing unsightly stains. To prevent the screws on the toilet seat from rusting, fill the holes with tub and tile caulking, then use a putty knife to level the caulking and allow it to dry before closing the lid.
How do you remove old toilet seat with hidden FIXS?
1:523:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipButton we're just going to simply press those in lift up and the toilet seat will come. Off. Now we'MoreButton we're just going to simply press those in lift up and the toilet seat will come. Off. Now we've got our toilet seat off we've got our caps exposed.
How do I remove a stripped toilet seat bolt?
Place the end of a putty knife against the screw at the bottom of the toilet, above the plastic nut. Tap the end of the putty knife with a hammer, digging the knife into the screw. Continue tapping until the putty knife cuts through the screw, then lift up the seat and screws.
How do you remove an object lodged in a toilet?
First, turn off the water supply. Find the water valve — it should be on the wall behind your toilet — and make sure it's closed....5 Ways to Get Stuck Objects Out of Your ToiletRemove the Toy With Your Hands. ... Use a Tool to Fish the Toy Out of the Drain. ... Plunge the Toilet. ... Use an Auger or Snake. ... Try a De-Clogger.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you get a rusted bolt off?
0:421:58How to Unstick Rusted Nuts and Bolts - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 4 when the bolt is cool enough to touch spray wd-40 on and around the nut and bolt. Step 5 tapMoreStep 4 when the bolt is cool enough to touch spray wd-40 on and around the nut and bolt. Step 5 tap the end of the bolt with a hammer to loosen the threads. And allow the oil to penetrate.
How do you get a stripped plastic nut off?
Use a flathead screwdriver positioned on the plastic nibs of the nut and a hammer. Tap the screwdriver to loosen the nut. Another method to try is with heat or a calcium dissolver. A hairdryer can soften the nut to make it easier to remove.
How do you remove a stripped screw that won't budge?
Try a Rubber Band A common household rubber band can do the trick. Simply place part of the rubber band over the head of the screw. Insert your screwdriver into the rubber band. Turn the screwdriver counterclockwise to remove the stripped screw.
How do you tighten a toilet seat with no access underside American standard?
STEP 1: Begin by lifting up the seat, and simultaneously press the buttons and pull up to remove it. STEP 2: Remove the hinge covers. STEP 3: Using a screwdriver, tighten the screws – be careful not to overtighten. STEP 4: Replace the hinge covers, and place the seat back onto the toilet hinges.
How do I replace the hidden bolts on my Kohler toilet seat?
0:011:12Installation - Quick-Release Toilet Seats - KOHLER - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow place the seat so the bolts are lined up with the holes in the toilet. Hold the bolts in placeMoreNow place the seat so the bolts are lined up with the holes in the toilet. Hold the bolts in place and push the self centering nuts onto the bottom of the bolts.
How do you replace hidden Toto toilet seat bolts?
0:442:16Toilet Seat Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by inserting the head of the screwdriver. Under the top of the screw cap to pop the cover andMoreBegin by inserting the head of the screwdriver. Under the top of the screw cap to pop the cover and expose the screw. Now take the screwdriver.
How do you tighten a toilet seat on a sealed toilet?
0:461:35How to tighten a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver theMoreSo this seat is removed simply by pulling. Up. The caps and using a Phillips head screwdriver the longer. The longer the screwdriver the better it makes it easier to type you simply tighten.
EASLY REMOVE OLD TOILET SEAT - RUSTED - ROUNDED NUTS - YouTube
Installing a new toilet seat is a simple 2 minute job, getting the old urine rusted nuts off can be a frustrating ordeal. Removing the old seat often the bol...
Learn 4 Ways How To Remove Rusted Toilet Seat Bolts
READ MORE: Best Most Comfortable Cheapest Toilet Paper Of 2022 If bolts tighten with nut too hardly and Plier and Socket wrench doesn’t work. Then you need to cut off the bolts. Generally, bolts are consist of metal there is also plastic bolt.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to hold a nut in place?
Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
Why is my bolt head deforming?
Screwdrivers that are too small can cause the bolt head to deform, especially if the bolt is plastic. Use the largest size screwdriver that will fit your bolt head for best results.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
What oil do you use to lubricate bolts?
In some cases, the nut won’t loosen which means you need to use penetrating oil or WD40 to lubricate both bolts. The penetrating oil is used for rusted bolts and nuts.
How to grip a wing nut?
Grip the nut with a wrench firmly and unwound. If the nut is in the shape of a wing nut, you can grip it by hand, if not, use a pair of pliers or vice grips to hold it. Don’t use too much pressure, especially if they’re made from plastic. Unfasten the bolts and use the screwdriver to unwound the screw.
What are hidden fixings on toilets?
Hidden fixings are common with modern toilets as people don’t want to see bolts on their toilets, plus it prevents them from damage. Look at the back of the toilet and check from underneath to see if you can spot screws. Again, they could be metal or plastic.
How to prevent a toilet from scratching?
Use your knife to cover the porcelain that is around the bolt head to prevent accidental scratches as you saw through. Secure the rest of the toilet with masking or duct tape as you don’t want to hack through any other part of the toilet. Cut through the bolt along with the hinges connected to the toilet seat.
How to unwound wingnut on toilet?
You could use a socket wrench to get a deeper , firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
How to stop rust on brass hinges?
To counter the rust on the brass or steel hinges, you could use a lubricant to soften the grip on the nut . That is if the nut doesn’t badge. Use WD40 or penetrating oil, pour a generous amount over the bolt, and let sit for some time, say an hour. Let the oil seep into the bolt to lubricate it then try to open the bolt again.
How to clean rust off toilet seat?
Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
What to do if a toilet nut doesn't have wings?
If the nuts don't have wings, lock a pair of locking pliers around each one in turn. When you unscrew the screw, the pliers will hit against the toilet bowl and prevent the nut from turning, and it will loosen. Advertisement.
How long to wait after spraying a bolt?
Wait five minutes after spraying; then lock the pliers onto one of the bolts and find the longest screwdriver you can that fits the slots in the bolt head. You don't have to worry about holding the pliers, so put all your effort into turning the bolt counterclockwise with the screwdriver to loosen the nut.
How to stop threads from stripping?
To avoid stripping the threads, spray the bolts with a soap solution before unscrewing the nuts. Some nuts have wings that you can grasp with your fingers; while turning these, stabilize the bolt from above with a screwdriver. If the nuts don't have wings, lock a pair of locking pliers around each one in turn.
How to remove a nylon nut from a bolt?
Wearing protective gloves, heat the blade of a metal putty knife red hot with a propane torch and push it up into the nut, at its side nearest the bolt, from underneath. After it has melted its way through the nut on one side of the bolt, change the blade's orientation and make another groove on the other side of the nut, so that it can fall freely away. Repeat the operation on the second nylon nut and lift the seat off.
How to separate a nut from a nut?
Drill a hole straight up through the inside edge of the nut. Remove the bit and drill another hole 60 to 90 degrees away, then tap the section between the holes with a chisel, and the nut should separate. If not, drill more holes between the two you just drilled. After tapping off that section of the nut, you should be able to pry ...
How to melt a nylon nut?
If it doesn't, and the nut is nylon, you can melt it off with a hot putty knife. Wearing protective gloves, heat the blade of a metal putty knife red hot with a propane torch and push it up into the nut, at its side nearest the bolt, from underneath.
What are toilet seats notorious for?
Toilet seats are notorious for corroded, hard-to-remove bolts.
What does it mean when a toilet is broken?
You need to exercise care when working on a toilet. When the porcelain is broken or cracked during repair, it generally means the toilet has to be replaced. This turns a simple task into a complicated project. You do not need plumbing experience to remove a rusted toilet seat.
How to flip toilet seat backwards?
Place the tip of a screwdriver into the slot of one of the two plastic covers behind the toilet seat and gently pry up to flip the cover backward. Repeat the process on the other plastic cover.
What wrench to use to grip a nut?
Use a deep-socket wrench to grip the nut if it is recessed into the porcelain.
How long does it take to remove a toilet seat?
The project requires close-quarter work, and it may require several hours to remove the toilet lid.
Where is the nozzle tip of a can?
Place the nozzle tip of the can at the bottom of the nut and squeeze it while moving it around the circumference of the nut, driving oil up under the nut onto the screw.
Can a slipped wrench crack a toilet?
Do not apply excess force when working on a toilet. A slipped wrench can bang against the side of the toilet and crack it.
