Re: remove headlight 07 pontiac G6? If your talking about a dome light bulb. You don't have to remove the headliner. Look at the lens where the bulb goes. You will see a small slot on one of the side of it. Insert a screw driver and pry down on it and it will pop off. Same with side lights in the headliner.
Full Answer
How to replace headlight bulb on Pontiac G6?
How To Replace Headlight Bulb on Pontiac G6 Step 1: Determine Which Headlight - Dim or Bright Step 2: Remove Top Two Headlamp Mounting Bolts Step 3: Remove Top Bumper Cover Clips Step 4: Protect Bumper Cover Paint Step 5: Tug Bumper Cover Forward Step 6: Tug on Outside Edge of Headlight Step 7: Remove Headlight Assembly Step 8: Remove Bulb Cover
How to remove bumper cover from car headlights?
How To. 1 Step 1: Determine Which Headlight - Dim or Bright. To determine which headlight bulb is out, simply turn your headlights on dim and see if the ... 2 Step 2: Remove Top Two Headlamp Mounting Bolts. 3 Step 3: Remove Top Bumper Cover Clips. 4 Step 4: Protect Bumper Cover Paint. 5 Step 5: Tug Bumper Cover Forward. More items
Is it hard to repair a Pontiac G6?
Cars are quite different than they used to be. Sure, modern cars have some cool things, but repairing them are becoming difficult. Even simple things like changing a headlight bulb. The pontiac G6 is not as hard as some of them, but it can take some time.
See more
How do you change a Pontiac g6 headlight?
4:458:24How To Replace A Headlamp Bulb on 2009 Pontiac G6 - DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then the bulbs right here so you turn that bring it out. And then these have two clips on themMoreAnd then the bulbs right here so you turn that bring it out. And then these have two clips on them you just kind of pull out on that clip. And that just pulls off. So this is the old bulb.
How do you remove a headlight assembly?
InstructionsStep 1: Remove the old headlight assembly. ... Step 2: Disconnect the assembly. ... Turn the headlamp retainer ring counter-clockwise to remove it from the headlamp. ... Step 3: Disconnect electrical. ... Step 4: Remove old assembly. ... Step 5: Replace the assembly. ... Step 6: Connect the new assembly.More items...
How do you remove a headlight from a 2007 Pontiac g6?
0:224:26How to Replace Headlights and Bulbs 05-10 Pontiac G6 Sedan - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a flathead pocket screwdriver to lift up on the center part of the plastic rivet and thenMoreUsing a flathead pocket screwdriver to lift up on the center part of the plastic rivet and then going back and taking out the outer portion of the plastic rivet with the same little screwdriver.
How do you remove a headlight from a socket?
How to change a headlight bulb in 5 stepsPower your car down. To ensure safety, turn off your car and take the keys out of the ignition.Open engine compartment. ... Disconnect the headlight bulb power wires. ... Unscrew the old headlight. ... Screw in the new headlight bulb.
What tools are needed to remove headlight assembly?
How To Install A Set Of Headlamp AssembliesTools needed: flat wrenches, socket wrenches, rivet gun (on certain vehicle applications), screwdriver(s), Torx head bits (if applicable), electric drill (if applicable)Tools needed: Socket wrench, screwdriver(s)More items...
What tools do I need to remove a headlight?
Many headlight bulbs can be removed without tools, but some do required the use of a flathead or Phillips screwdriver. If there are power wires connected to the back of the bulb, remove them. There might also be a dust cover that you need to remove from the back of the headlight.
How do you remove headlights from eyelids?
0:082:41How to remove eyelids from headlights. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once you get your plastic card basically go under the island. And start removing the double-sidedMoreSo once you get your plastic card basically go under the island. And start removing the double-sided tape little by little and this is gonna take a lot of patience.
Are there any recalls on a Pontiac g6 2007?
General Motors (GM) is recalling certain model year 2007-2010 Saturn Aura and model year 2008-2010 Chevrolet Malibu and Pontiac G6 vehicles, equipped with a 4-speed automatic transmission. On these vehicles, the tabs on the transmission shift cable end may fracture and separate.
How do you remove screws from headlights?
Remove the bolts above the headlight with a socket wrench Using your socket wrench, secure the bolts and rotate anti-clockwise till the bolts come off. Once they are off, be careful not to pull the headlight too far because the electrical wiring will still be connected.
Do I need to disconnect battery to change headlight socket?
Always disconnect the battery when changing a blown headlight bulb. Headlight bulbs are connected to your vehicle's electrical system. They'll pull power from the battery while the alternator recharges the battery.
Is it difficult to replace a headlight assembly?
Replacing a headlight assembly might sound difficult, but it's really not much harder than changing the lightbulb, so long as you have the right tools to hand. Doing a job like this yourself will help you save on parts and labour charged by a garage, which is only a good thing given how expensive new headlights can be.
Can you remove headlight housing?
Headlights are sealed with a glue-like sealant, which can make them more difficult to open. Luckily, you only need a few tools and an oven to break the seal around the housing. As long as you use low heat and handle the headlight carefully, you'll be able to open it without breaking it.
How do you remove a headlight retainer?
0:427:26How to Replace Headlight Bulb Retainer 2001-2005 Ford Explorer ...YouTubeStart of suggested clipEnd of suggested clipNow to remove the headlamp assembly from the area you're going to find that you have two tabs thatMoreNow to remove the headlamp assembly from the area you're going to find that you have two tabs that you can use some pliers grab onto and lift them. Straight.
Do you have to disconnect the battery to change a headlight assembly?
Always disconnect the battery when changing a blown headlight bulb. Headlight bulbs are connected to your vehicle's electrical system. They'll pull power from the battery while the alternator recharges the battery.
How to remove headlight assembly?
To remove the headlight assembly, pull the bumper cover forward while pushing the headlight out. This is a tight fit, so are must be taken.
How to tell if headlight bulb is out?
To determine which headlight bulb is out, simply turn your headlights on dim and see if the headlights are both on. Then switch to bright and look if both brights are working. On the G6, these are separate bulbs.
How to remove bumper cover clips?
Using a flat head screwdriver, pry the center of the clip to remove the 4 clips from the top of the bumper cover.
Can you touch a bulb with your hand?
Instal the new bulb. Some bulbs should not be touched with your hand, as the oils in your hand may shorten bulb life.
Is it hard to repair a Pontiac G6?
Even simple things like changing a headlight bulb. The pontiac G6 is not as hard as some of them, but it can take some time.
How long does it take to pop a wiring harness clip off?
You may have to pop the clip off of part of the wiring harness but that takes only a few seconds and a flathead screwdriver.
Can you take out fog lights?
Note about the fog light location, YES you can get the fog light bulbs out by removing the headlight assembly first. Its a whole lot easier than removing the whole bumper or even the inner fender as some people have suggested.
Can you get fogs after removing headlights?
yeah you can get to the fogs after removing the headlight.
Do you need a sledge hammer and duck tape?
Yeah! Always gets the job done in the end! Now you just need the sledge hammer, duck tape, and you have the whole set!