What is 80-20 aluminum?
80-20 is an aluminum product that is designed to be super lightweight, very strong, and very versatile. It is incredibly easy to cut, bolt together, and create just about anything! Check out these cool projects with 80-20 to get some ideas. Tow in Skateboard..
What can you make with 80-20?
80-20 is an aluminum product that is designed to be super lightweight, very strong, and very versatile. It is incredibly easy to cut, bolt together, and create just about anything! Check out these cool projects with 80-20 to get some ideas. Tow in Skateboard.. Bicycle Trailer. Electric Chopper... Version 1.
What is 8080-20?
80-20 is an aluminum product that is designed to be super lightweight, very strong, and very versatile. It is incredibly easy to cut, bolt together, and create just about anything!
What is 8080/20 profile material?
80/20 profiles come in a range of shapes and tubes so you can find the option that’s right for your project. They are made of 6105-T5 aluminum (or comparable), which has a wide range of benefits - for instance, it’s lightweight yet strong, resilient, corrosion-resistant, nontoxic, and aesthetic.
What is 80/20?
What is 80/20 aluminum?
Why is 80/20 called 80/20?
Why do they call it 8020?
Where Does the Name 80/2080/20T-slot structural framing, sometimes known as aluminum extrusion, or 2020 extrusion when the cross-section is 20x20 mm, is a framing system consisting of lengths of square or rectangular extruded aluminum, typically 6105-T5 aluminium alloy, with a T-slot down the centerline of one or more sides.https://en.wikipedia.org › wiki › T-slot_structural_framingT-slot structural framing - Wikipedia Come From? The curious name “80/20” is actually the brand name of the manufacturer of the extruded aluminum stock — 80/20, Inc.
How do I attach plywood to 8020?
0:491:5080/20: Panel Mount Block Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the location we want and tighten it down with our wrench. From there we'll take our panel. LineMoreFind the location we want and tighten it down with our wrench. From there we'll take our panel. Line it up with our block and feed the bolt. Through. Go ahead and tighten that down.
What is the best way to cut 80 20?
The best way to deal with 8020 is to cut it by whatever means you have, a little longer than needed, then mill the ends square so they can be butted together and joined and you know they'll end up square.
What's the difference between T-slot and V slot?
The difference between T-slot and V-slot profiles has nothing to do with T-nuts or brackets—those components will work in either profile variation. The compatibility of bearings or joints will vary, but T-nuts and brackets are more versatile. To put it simply, how T-slots and V-slots differ comes down to their shape.
How does aluminum extrusion work?
Aluminum extrusion is a process by which aluminum alloy material is forced through a die with a specific cross-sectional profile. A powerful ram pushes the aluminum through the die and it emerges from the die opening. When it does, it comes out in the same shape as the die and is pulled out along a runout table.
How do you build with aluminum extrusions?
0:352:58How to Work with Aluminum Extrusions | Digi-Key ElectronicsYouTubeStart of suggested clipEnd of suggested clipIf you have a carbide tip high tooth count blade in a chop or radial arm saw you're ready to startMoreIf you have a carbide tip high tooth count blade in a chop or radial arm saw you're ready to start fabrication. A blade with 100 or more teeth is highly recommended.
Can you cut aluminum extrusions with a miter saw?
Conclusion. Cutting aluminum with a miter saw is possible if you follow the right steps – make sure you have the right blade, clamp the material properly, use some lubricant, and begin cutting your materials to the highest precision.
Can a table saw cut aluminum extrusion?
Thankfully, the answer is a qualified yes. Non-ferrous metals such as aluminum can be cut safely on a table saw as long as a few precautions are taken. Blade selection. Cutting aluminum with a table saw requires a blade designated specifically for cutting non-ferrous metals.
What is Vslot?
v-slot is used on an HTML element. v-slot can only be used on a element or the component receiving the slot. Otherwise, Vue throws a compile error. See Example 1 below. v-slot is used on a component, but the component has another as a child.
How do you join aluminum T slots?
0:181:50T-Slotted Aluminum Solutions- Anchor and End Fasteners - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis anchor is then inserted into a pre machined piece of tea slotted aluminum. The other T slottedMoreThis anchor is then inserted into a pre machined piece of tea slotted aluminum. The other T slotted bar then slides onto the anchor and is fastened tight with a t-handle or L handle.
How strong is aluminium extrusion?
The Extrusion Process By using powerful hydraulic presses capable of exerting up to 15,000 tons of pressure, aluminium can be extruded into any shape you could imagine.
How do you stick ply to walls?
You can hang the plywood panels with french cleats to minimize damage to the walls. One half of the cleat is screwed to the wall and the other half is screwed to the panel. Then they hook over each other to hold the panel on the wall.
How do you finish a wall with plywood?
Making Plywood Walls Look Good The secret to getting it to look the same as the drywall, is to start by taping the plywood, just like you would with drywall. Then, skim coat the entire plywood surface with drywall mud and then sand it smooth. Once textured and painted, it will look just like the rest of the walls.
How do you install plywood on a wall?
2:4317:11Installing PLYWOOD WALLS (instead of DRYWALL) in the Not So Tiny ...YouTubeStart of suggested clipEnd of suggested clipAnd we started by mounting a straight board flush with the laser line on this gable end wall and asMoreAnd we started by mounting a straight board flush with the laser line on this gable end wall and as you'll see we could butt our plywood.
Why Choose 80/20, Inc.?
Known as The Standard in T-slot aluminum profiles for over 30 years, 80/20 has a wide range of aluminum extrusions and accessories. Our unparalleled support from concept to completion, paired with the highest level of quality in the market, is what sets 80/20 apart.
What is 80/20 aluminum?
80/20 is a T-slot aluminum framing system you can use to create virtually anything. One of the many benefits you’ll experience with 80/20 aluminum extrusions and parts is its versatility. The open T-slot concept allows exact positioning and repositioning, enabling you to make adjustments and modifications fast and precisely.
What is 80/20 program?
The 80/20 program is VOLUNTARY. Landlords opt in by electing to take low/no-interest financing for their buildings; in exchange, they agree to various things including providing 20% of the units to lower income tenants.
What does it mean when landlords opt into the 80/20 program?
The fact that they opt into the 80/20 program means that they think they can make more money with the cheap financing and providing 20% of the units at a loss than otherwise.
What does 80/20 mean?
The 80/20 program, in its effect on the community, means that you have people who are in lower-wage jobs and professions who live locally. I mean, like the bodega manager, or nurse's aide, or similar jobs. Without 80/20, it would mean that all those people would by necessity live in the far outer boroughs.
Do we all want to live in nice buildings?
Anyhow, yes, we all want to live in nice buildings. I am not even going to try to pretend otherwise. However, the causal attribution you are making is what offends us. It's not about being liberal or conservative.
Is Chicago 80/20?
Living in a luxury doorman building in prime manhattan is NOT a right, although liberals may disagree. From my understanding, Chicago does NOT have 80/20, and they have cheaper rent AND higher-quality luxury buildings.
Why did 80/20 choose to name their company?
Why did they choose this name? According to 80/20, they named their company and product line after Pareto’s Law (from Vilfredo Pareto (1843 – 1923)), an Italian economist and sociologist who said that 80% of your results come from 20% of your efforts .
What is the strength of aluminum for 80/20?
As we all know, steel is an exceptionally strong material, but so is the aluminum used to make 80/20 extruded frames: it’s made from 6105-T5 aluminum alloy, which has a tensile strength of 35,000 lbs. per square inch.
How Tough are Formaspace Tables and Workstations?
The load capacity of our Standard Duty benches, tables and workstations is 1,000 pounds (evenly distributed), making them much, much stronger than typical office furniture. But is it overkill? Not really. If you are using lightweight furniture with an internal core built out of a paper-like honeycomb material that’s held up by legs screwed into this same lightweight material (typical of many desks and tables from IKEA), you could have a serious, even life-threatening accident if the furniture were to collapse. How could this happen? Here are two common scenarios: too many workers sitting on desks and tables during a meeting, or workers stacking heavy boxes of books and paper on insubstantial benches, tables, or workstations.
What are 80/20 Aluminum Extrusion T-slot Frames?
If the term extruded aluminum seems unfamiliar to you, you may be surprised to know that it’s actually a very common material. You’ll find that extruded aluminum is commonly used in most bathtub shower enclosures or in tracks supporting sliding patio doors.
Where Does the Name 80/20 Come From?
The curious name “80/20” is actually the brand name of the manufacturer of the extruded aluminum stock — 80/20, Inc.
What is a t-shaped slot?
The type of aluminum extrusions used by Formaspace for building furniture frames have square cross-sections with a t-shaped slot (e.g. void) incorporated into each facing side. By design, these t-slots allow the fasteners that hold the frame sections together to pass through. During assembly, the fasteners are pushed down the slots to the correct position — where they are held snug inside the slot rail. This makes it easy to tighten the fasteners — only one tool is required.
What is Formaspace furniture?
Every industry is unique. Formaspace creates benches and industrial furniture for customers with some of the most demanding requirements imaginable. We’ve installed custom solutions in even the most extreme physical environments. Backed with our own in-house industrial design and engineering team, we are able to work with you to understand your specific needs and then execute a solution, no matter how unique.
How many routes to go when building an 8020 Sim rig?
There are essentially 3 routes to go when building an 8020 sim rig:
Why choose an 8020 sim rig?
Lower-priced (non 8020) metal rigs tend to have a lot of flex , are not suited for direct drive wheel bases and often need to be completely replaced when upgrading your setup. This is where 8020 sim rigs stand out, they have unrivalled stiffness and customisation possibilities which allow you adjust to all sizes and add parts modularly as you upgrade your setup.
Can you go wrong with an 8020?
When it comes to choosing an 8020 sim rig, it is just about picking the setup that suits your budget and personal set up preferences. You can’t really go wrong with any of these pre-designed rigs. If you find that they don’t totally satisfy you out of the box you can always adjust or modify them to suit you, such is the magic of aluminium profile. Hopefully this article has given you a better idea of the kind of route you want to go down while entering the wonderful world of 8020 sim rigs.
Can you build an 8020 sim rig yourself?
If you want to have more control over the final product and save a bit of extra money, you also have the option of building an 8020 sim rig yourself. You can order aluminium profiles , fastening bolts and everything else you need directly from manufacturers such as Motedis or 80/20 Inc to name a few.
What is 80/20 framing?
80/20, Inc. is a manufacturer of slotted extruded aluminum framing. Their slogan is “the industrial erector set, ” and that’s a good way to describe it. 80/20 makes enough connectors and accessories to build your own space shuttle, if you wanted to. They manufacture a variety of internal and external fasteners, hinges, bearings, glides…you get the idea. In general, the slots in the aluminum provide the mechanism for attaching structures together.
How to use 80/20?
In general, you will be using 80/20 to create a frame for your cabinetry , but you can also use it to create a secure tie-down for your batteries, water tanks and other hardware. The most common connection will be a 90-degree angle where an aluminum angle bracket will attach the two extrusions together. With a boxed frame constructed you will then bolt your drawers and cabinet faces to the structure. There are times you may want to run a couple extrusions parallel to each other, in which case you would use a simple plate bolted between the two extrusions. The 90-degree angle brackets will mostly likely represent 95+% of your connections.
What bolts fit in 80/20?
For the purposes of our discussion the most common non-metric 80/20 profiles are the 1” bars (called “10-series”) and the 1-1/2” bars (called “15-series”). Conveniently, a 5/16″-18 carriage bolt fits nicely in the 15-series profile. 1/4″-20 bolts are “supposed” to fit in the 10-series profile. However some have reported that not all 1/4-20 bolts fit. We have used both the 10 and 15 series and prefer working with the 1-1/2” 15-series. The primary reason is not due to the strength of the extrusion, rather the hardware that bolts them together. We broke two 1/4-20 carriage bolts in the process of building our battery box with 10-series. We very well may have overtightened them, but each time we were shocked how easily the bolts broke. In working with the 15-series extrusions and 5/16” bolts, we have not had that problem. A 5/16” bolt has a 61% higher proof load and tensile strength than a 1/4-20.
What is the 80/20 rule?
The 80/20 rule is a statistical principle that states 80% of results often come from approximately 20% of causes. In 1895, Italian economist Vilfredo Pareto published his findings on wealth distribution after he discovered that 20% of Italy’s citizens owned 80% of the country’s wealth.
Why is the 80/20 rule important?
Applying the 80/20 rule to business matters has several advantages, especially in how you can streamline the company’s business model to invest in the people, products and systems that offer the biggest returns.
What is 80/20?
Are you wondering what 80/20 is? What do we sell and what, exactly, does the name 80/20 mean? Simply stated 80/20 is a T-slot construction system you can use to build virtually anything. When you think of 80/20 think of “an erector set” for adults. You mix, match, assemble and reassemble products to create your customized solution or innovation.
What is 80/20 aluminum?
80/20 is the originator and manufacturer of “The Industrial Erector Set®,” a modular T-slot aluminum building system for every industry or application. From light to heavy-duty, 80/20 is a perfect solution for automation solutions, robotic arms, machine frames, guarding, enclosures, displays, workstations and the DIY home hobbyist. With a catalog of over 8,500 products to choose from, free design assistance and 80/20 Builds assembly support, 80/20 will ensure your project is completed to the highest standards.
Why is 80/20 called 80/20?
Why the Name 80/20? Vilfredo Pareto. In business, the 80/20 theory is a powerful tool. This theory is called Pareto's Law after Vilfredo Pareto (1843-1923) , an Italian economist and sociologist who said that 80% of your results come from 20% of your efforts.
